answersLogoWhite

0


Best Answer

There could be two reasons. One is that the receptical is old and well used and the connected load is close to 1500 watts. Second is that the wires have become loose on the terminal screws and are arcing. In either case get the receptical replaced right away.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why is wall socket hot?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

When you switch off a 3 pin power socket at the wall is it still earthed?

A properly installed switch for a wall socket will only interupt the 'hot' leg. The earth (or ground) and the neutral will remain connected.


Which slot does electricity flow from in a wall socket a taller one or a shorter one?

The short one is the hot.


What type of energy is a wall socket?

Electrical energy comes out of a wall socket.


What type of energy is wall socket?

Electrical energy comes out of a wall socket.


What type of energy is used for a wall socket?

A wall socket provides electrical energy.


What would cause a wall socket to catch on fire?

An outlet will only get hot enough to cause a fire if:There is a problem with the wiring connecting it to the supply, this will become quickly obvious when in use.It is overloaded. The electrical supply is supposed to have a fuse or breaker to prevent this.There is also a 3rd cause of potential fire:3. A loose wall socket connectionLoose wall socket connections can be a MAJOR concern, causing the plug and socket to overheat. This is primarily a problem on older homes.


What size socket to use to remove a spark plug from a kawasaki vulcan 500?

18mm deep THIN wall socket has to be thin wall


What is OD of 30 mm socket?

Depends on if it is a standard or thin wall socket. Measure it.


Which test is used to verify that socket outlet and switches have been correctly connected?

If you are referring to a "socket" as a receptacle there is a device that can be purchased at a hardware store that just plugs in and with lights it tell you if the wiring is correct. All switches should be wired with the hot wire at the top. On a wall switch hot wire to the top screw.


How do you remove a wall socket?

# Find the circuit breaker or switch that controls the wall outlet and turn it OFF. # Remove the faceplate. # Remove the upper and lower screws holding the wall socket in place. # Remove the two wires from the back or sides of the socket. Installation is the reverse.


In a Porcelain socket what color is the hot screw?

The hot screw on a Porcelain socket or and electrical is the Gold screw. The Silver screw is the neutral


Who gave America the wall socket?

thomas edison