0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What part of a filet weld that can be convex or concave?
The 'face' of the weld may be slightly convex, flat, or slightly concave.
What is root pass?
It is the first pass in a multiple weld joint.
HOW to calculate weld volume?
See related link below
How to reduce the diameter of pipe from 12 inch to 10 inch?
With large diameters like that you will most probably need to insert a weld-on 12 inch - 10 inch reducer at the point where the reduction is required. The pipe and reducer perimeter edges should be bevelled, say 45 degrees, for good weld penetration especially if the pipe conveys fluid under pressure.
How to build a chopper frame?
1.cut 2.bend 3.weld
What part of a filet weld that can be convex or concave?
The 'face' of the weld may be slightly convex, flat, or slightly concave.
How do you measure filet weld?
In a fillet weld, the leg and size are the same for the convex weld.
One should never cut or weld directly against?
You should not weld on concrete, as it can explode if heated
Should you weld a crack in your oil pan or buy new?
You should buy a new one cause if u weld it, the metal pieces might get mixed with your food.
What is a straight weld bead on the surface of a plate with little or no side to side electrode movement called?
A narrow, straight weld bead that is created by moving the SMAW electrode straight along the weld joint. A quality stringer bead should have good tie-in on both sides of the weld.
What is a weld symbol?
A weld symbol is the shape drawn on a Print to tell the welder: how to prepare a welding joint, what process can be used to weld (mig, tig, arc, etc) what filler rod to use, how wide and long the weld should be, how to deal with the weld after your done (grind flush, brush clean, or nothing) and a million other things.... Its a tool that design engineers use to communicate what the weld needs to be to meet their design specifications.
What rod should be used to weld mild steel to stainless steel?
309
How close can one weld be to another weld?
Depends on what you are welding, but generaly welds can meet, or even weld on top of a weld.
What is weld mapping?
Weld mapping are visible marks that are seen on metal welded parts. Either they are welded together or repaired and sometimes you can tell who welded it, and when the weld was placed. Weld mapping is the process of assigning information to a weld joint to enable easy identification of its design (WPS), production (welders, their qualifications, date welded), quality (visual inspection, NDT) and traceability (heat numbers of materials joined & welding consumables). Weld mapping should also incorporate a pictorial identification to represent the weld number on the fabrication drawing, in case the designer does not nominate a weld number. You can use online weld mapping software such as Smart Welding Manager to create weld maps that provide 100% traceability as well as a pictorial representation.
Who is Theodore Weld?
Theodore Weld
Where is the Weld Public Library in Weld located?
The address of the Weld Public Library is: 25 Church Street, Weld, 04285 0120
What should the welder watch if the view of the weld is obstructed by the shielding gas nozzle?
Porosity
