Want this question answered?
The color of the wire does not indicate its polarity. In electrical systems, the polarity is typically designated as positive (+) and negative (-) rather than plus or minus. To determine which wire is positive or negative on a lamp connection, you would need to consult the manufacturer's instructions or use a multimeter to check the voltage.
LED's are DC voltage. Transformers are AC voltage. There is no positive or negative on AC voltage. You would need a diode to change the AC to DC, then there would be positive and negative voltages.
probably to measure a lamp depending on if its a desk lamp or a stand up lamp, if you use a stand up lamp, i would suggest using either feet or inches
Kilograms. A lamp would typically weigh at around 10 kg
Well here are the steps: 1.get a paper,and a lamp 2.put the paper down. 3.Then put the lamp facing the paper. 4.Then put your hand under the lamp's light. DONE!!
for Tungsten lamp the slope of the curve is positive where for carbon it is negative
As carbon filament bulbs have a negative temperature coefficient and tungsten filament light bulbs have a positive temperature coefficient.
tungsten
i believe it is cadnium.
There are two types of lamps the tungsten halogen lamps and incandescent lamps. Tungsten Halogen Lamps are similar to incandescent lamps and produce light in the same manner from a tungsten filament; however the bulb contains a halogen gas (bromine or iodine) which is active in controlling tungsten evaporation, whereas the incandescent lamp suppresses tungsten evaporation.
Incandescence of a finely coiled tungsten wire.
tungsten lamp has got inert gas argonsometimes iodine is added to improve intensity carbon filament produces less light than tungsten lamp but it radiates much less energy in the form of heat waves
If the filament really was made from a material that has a negative temperature coefficient (as temperature increases, resistance decreases) then the decreasing resistance would cause more and more current to be taken as the lamp heated up and the temperature would get higher and higher in a runaway manner until either the power supply's breaker would trip or (more likely) the light bulb's filament would simply burn open. In fact the filament has to be made from a material that has a positive temperature coefficient. (As temperature increases, resistance increases.) Then, as the bulb's temperature rises, its filament's increasing resistance causes less current to be taken than when it was cold. Quite quickly a stable "steady-state" temperature and "running" resistance is reached so that the bulb simply continues to give out a steady amount of light according to the current it is taking from the electricity supply.
because somebody didn't answer
why is iodine sometimes introduced into atungsten lamp.in addis ababa university.
The piece of coiled wire made of Tungsten (Wolfram) that heats up and glows in the lamp.
The purpose of a lamp is to light up a small area.