Want this question answered?
It is same as the bit rate. B = R = nfs where n= no of bits fs= sampling frequency R= bit rate
We need at least two numbers on the PCM to match and replace it.
in pcm entie sample is sent.. where as in dpcm the difference between the predicted value and the original sample is sent which will be smaller when compared rto the original sample..
PCM (Pulse Code Modulation)
replaced ignition coil pack, PCM and spark plugs. No signal comes from the computer to fire plugs 2 and 3, but 1 and 4 are firing nicely. The van WILL NOT start, but -- at times -- it tries. Please help. There is possibility that I bought a faulty PCM with the same problem that I had from the original, but I dunno.
>8000hz
As we know that the sampling rate is two times of the highest frequency (Nyquist theorm) Sampling rate=2 Nyquist fs=8000hz/8khz
The standard CD is two-channel 16-bit PCM encoding at a 44.1 kHz sampling rate per channel.
It is same as the bit rate. B = R = nfs where n= no of bits fs= sampling frequency R= bit rate
Timing is controlled by the PCM .
Timing is pre-set by the PCM
A grounded signal wire from pcm, faulty pcm, or faulty injector are the only possible causes.
THE PCM IS ON THE PSSENGER FIREWALL THE PCM IS ON THE PSSENGER FIREWALL
timing is set by pcm, at factory!!
You can not. It is a one time program.
Yes, the Pcm memory will be cleared with each disconnect.
digital converter extracts samples of analog signal from input siganl digital converter quantizes analog sample and assignes a binary numbervalue to it digital coanverter encodes a quantized analog signal to transmit it across a digital network