Barely/Maybe.
Exact values depend on the type of pipe, but at 2600 gpm your velocity in the pipe is pretty close to 30 ft/sec. That is at the very upper limit (really a little above) the recommended flow velocity in piping. Head loss would be about 15 psi/100ft.
So, if you had a short length at this size and flow it might work OK, but for any significant length the head loss would kill you in pumping costs.
If the flow velocity remains the same the flow volume will increase by the square of the diameter ratio.(2/1.25) = 1.6 = diameter ratio1.62 = 2.56 more flow volume through 2 inch pipe compared to 1.25 inch pipe.
Yes, easily.
10gpm
Depends on what is flowing through the pipe and the temperature of the pipe.
A pipe that is 10 inch would have the velocity of 2.75 feet. This is 2.75 feet with 722 GPM.
That depends entirely on the viscosity of the liquid in the pipe ! Water would flow faster than oil !
Approx 73,167
that's what she said
of course liquid can flow through a pipe?
1200
61,101.8 gallons per 2,600 feet of 24" pipe.
It would 2.75 feet with a 10 inch pipe. It would be 2.75 feet with a volatility of 722 GPM.