0
What else can I help you with?
How many watt amplifier will power two 15 inch speakers?
It depends on the power handling capability of the speakers. Generally, a 500-600 watt amplifier would be sufficient to power two 15-inch speakers that have a power handling capacity of around 250-300 watts each. Make sure to match the amplifier's power output with the speakers' power handling to avoid damaging the speakers.
Ok so the speakers you have are visonik two 12 1000 watts peak power handling 500 watts rms power handling and your amp is an American pro bass machine with800 watts for max power output?
Yes.
What happens when two 250 watts speakers are connected in 75 watts amplifier in parallel?
They will work OK. When a speaker is rated at 250 W that is only a maximum and speakers will work will less audio power. Putting two speakers in parallel will double the total audio power output for a given volume setting.
What happens when two 250 watts speakers are connected in 75 watts amplifier in parallel connection?
They will work OK. When a speaker is rated at 250 W that is only a maximum and speakers will work will less audio power. Putting two speakers in parallel will double the total audio power output for a given volume setting.
Can two 1300 subs work with a 1200 amp?
Yes, the sub will work fine. Speakers ususally have two ratings, RMS which is constant power handling and peak power- meaning it can handle peaks of the higher rating. If your speaker is rated for 1300 watts then that is likely the peak rating. It is better to use speakers that are rated for more than the power of the amp you are using so there is no chance of blowing the speakers. The speakers will also produce cleaner sound when the amp is running close to capacity without overdriving and distorting the speaker. Also, if the amp is a stereo amp rated for 1200 watts it is only putting out a maximum of 600 watts per channel.
What is manual handling?
Manual handling refers yo the use of the human body to lift, lower, carry and empty loads.
How can you minimize the risk of manual handling activities?
Manual handling is the process of picking up, carrying, and putting down objects by people using only their own hands and muscle power. You reduce the risks of manual handling by training people how to safely lift and carry and by providing equipment to eliminate the manual handling of heavy or awkward objects.
What power of amplifier do i need for 6 ohm speakers to connect them to my computer?
Most power amplifiers will handle a load of 6 ohms. The spec you need to look at is the power handling of the speakers. If they are rated for 100 watts program power, then look for an amplifier rated for 100 watts RMS output. Any amplifier can be connected with adapter cables to the typical 1/8" output of your computer.
Can a 15 watt amplifier power 300 watt speakers?
No, a 15 watt amplifier would not be able to properly power 300 watt speakers. The amplifier's power output should ideally match or exceed the power handling of the speakers to ensure they can function properly and avoid potential damage. It is recommended to use an amplifier with power output closer to the speakers' rating for optimal performance.
What is the wattage for jbl model mr902?
The JBL MR902 speakers are designed to handle up to 180 watts of power. This means that they can handle up to 90 watts RMS (continuous power) per speaker. It is important to match the speaker's power handling with the appropriate amplifier power to avoid damaging the speakers.
How does magic blocking work when targeting multiple creatures simultaneously?
When magic blocking targets multiple creatures simultaneously, the blocker must have enough power to block each creature individually. Each creature is blocked separately, and the blocker's power is divided among the creatures being blocked. This means that the blocker's power must be equal to or greater than the combined power of all the creatures being blocked.
Can you wire 2 16 ohm speakers to 16 ohms?
No. Two 16 ohm speakers connected together are either 32 ohms, if wired in series, or 8 ohms, if wired in parallel. You can, however, connect four 16 ohm speakers in series-parallel to get 16 ohms, with four times the power handling capacity of just one.
