Assuming dimensions in inches.
Using pi = 3.1416
Cylinder radius = 4.5 / 2 = 2.25
>
Engine Capacity = pi * r * r * l * 4
So >
3.1416 * 2.25 * 2.25 * 4.5 * 4 = 286.2783 cubic inches ( 4691.261 cu cm )
The dousing method is a common method used to find water. The user takes a Y shaped rod, holding it loosely, pointing upwards at a 45 degree angle. It should point downward when you are close to ground water.
90 * * * * * No. 45 - 45 equals 45 is a false statement.
lcm(5, 3) = 15 lcm(5, 45) = 45 lcm(3, 45) = 45 lcm(5, 3, 45) = 45
45 multiplied by 45 is 2025
1 x 45 and u just keep adding 45
The bore diameter is different, requiring bigger pistons, bigger valves, more robust block, and more aggressive cam profile. Among other things.
refers to bore size
The bore refers to the hole in the gun barrel thru which the projectile (bullet) passes. Some guns have a smooth bore, but many modern guns, both pistols and especially rifles, have a rifled bore, that is, the bore has a helical (spiral) groove that causes the projectile to spin as it flies thru the air. The diameter of the gun's bore determines the size of the bullet or shell (e.g. .22, .45, 9mm, etc.)
It will go about 45-50 mph
Yes, Kirby Puckett died on March 6, 2006 of a massive stroke. * He suffered the stroke on March 5, not March 6. By that time the stroke was over, but he died from complications of the massive stroke.
Not unless the maker says it is safe to do so.
Air Rifles come in several different bores. .177, .20, .22, .25, 9mm, 45 Cal, 357, and 50 Cal. Big bore usually refers to the 9mm, 45 Cal and 50 Cal. These rifles fall into the PCP class of Air Rifles.
very slow the 4 stroke cant even catch the 2 stroke with some mod work on the 2 stroke you can get 45-50 mph on a 90 check wrh racing and hetrick racing.
The 9mm means that the bore is 9mm inside diameter . The bullet will be roughly 9mm or a little more in diameter. The 45 means basically the same, the bore of the barrel is .45 caliber. but the bullet will be anywhere from .451 to .452 in diameter depending on manufacture and on type of metal the bullet is made out of. So basically yes.
45%
5x114.3. Center Bore: 67.1. Hardware: 12x1. 50 Lug Offset: 45-55mm
A .45 is a gun with an internal bore diameter of .45 of an inch. Generally, when people speak of "a forty-five" they are referring to a US Army M1911/M1911A1 pistol or a clone made in that style.