428 square feet
258 pcs. Add at least 10 %. You should have 300 pcs.
In order to answer that question, we'd have to know the area ofone square of siding.You've got 1,000 square feet there. If 'S' is the area of one squareof siding, in square feet, then the number of squares you need isat least 1,000/S .
A square, roofing, siding, flooring is 100 sq. ft. A framing square is 16 inches by 24 inches.
It is precisely a square of siding to which each edge measures one foot. Therefore, each side of the square of siding is one foot in length.
-- If you use the house to store a truckload of siding inside, then it's volume. -- If you cover the outside of the house with siding, then it's surface area. -- If you lay pieces of siding on the ground all around the foundation, then it's perimeter.
There is one square in a box of siding. One square equals 100 square feet.
Windows should be installed after sheathing and before siding.
Remodeling. Adding rooms. Adding decks. Replacing outdated fixtures. Hardwood floors. Amenities, appliances, siding, new windows, ceilings, grass, landscaping.... etc.
a square in siding or roofing is 100 square feet (10x10) most house are between 10 and 14 square of siding
Siding that is flashing alongside windows is commonly called the trim. However, it also can be called molding or PVC.
258 pcs. Add at least 10 %. You should have 300 pcs.
"There are many companies that will install vinyl windows in North Carolina. Some of them include: Electrolux Corporation, Glass Doctor, Affordable Siding and Windows,and Moores Siding and Windows."
Usually stores such as Sears have contractors that they employ to provide services such as this. I am not sure about vinyl siding on windows, but they do have contractors that install vinyl siding as well as windows. You can inquire at your local Sears store as to the cost of installation.
Depends ENTIRELY on the size of the vinyl squares !
115 nails per SQ (100sf)
17 (calculated via least squares)
In order to answer that question, we'd have to know the area ofone square of siding.You've got 1,000 square feet there. If 'S' is the area of one squareof siding, in square feet, then the number of squares you need isat least 1,000/S .