5 out of 18 parts is 5/18. Multiply that by 360, since that's the number of degrees in a full circle.
180
If a circle is comprised of 360 degrees, then each of the five sections will encompass 72 degrees. From an arbitrary radius, using a protractor, measure 72 degrees, then continue around the circle.
its 360/15 = 24 degrees
You divide 360 degrees by eight (there are 360 degrees in a circle) so each section would be 45 degrees.
To divide a circle into 26 equal parts, you would first need to draw the vertical diameter of the circle. Next, draw a horizontal line through the center of the circle perpendicular to the diameter. Then, starting from the top of the circle, divide each half into 13 equal parts by drawing lines from the top to the bottom. This will result in a circle divided into 26 equal parts.
A circle has 360 degrees. Divide 360 by 18 and you will find that each equal part of the divided circle is 20 degrees.
A circle is 360 degrees. If they are equal parts, they are 36 degrees apiece, or 144 degrees.
Construct a circle with a 4.5 radius. The circle's circumference is 360 degrees. So mark out 3 by 120 degrees on the circumference and join them to the centre of the circle which will divide the circle into three equal parts.
A circle has a total of 360 degrees. If it is divided into 18 equal parts, each part measures ( \frac{360}{18} = 20 ) degrees. Therefore, the angle for 5 parts is ( 5 \times 20 = 100 ) degrees.
180
A circle is 360 degrees, so 360/14 gives the measure of the angle of the 14 equal parts (which would be wedges). So, quick answer: about 25.7 degrees
A circle has 360 degrees inside it, 360/3=120. Cut the circle up so that there are three 120 degree angled wedges and you have 3 equal parts.
To divide a circle into 5 equal parts, you would first need to draw a horizontal line passing through the center of the circle. Next, draw two diagonal lines from the top and bottom of the circle to the center point where the horizontal line intersects. This will create 5 equal parts within the circle, each measuring 72 degrees.
It is 60 degrees
If a circle is comprised of 360 degrees, then each of the five sections will encompass 72 degrees. From an arbitrary radius, using a protractor, measure 72 degrees, then continue around the circle.
One fifth of a circle is equal to 360 degrees divided by 5, which is 72 degrees. This means that if you were to divide a circle into five equal parts, each part would measure 72 degrees. This calculation is based on the fact that a full circle is 360 degrees.
its 360/15 = 24 degrees