Depends. 1000 liters of water (standard temperature pressure) weighs one metric ton (1000 kg). On the other hand, about ten thousand liters of dry, uncompressed adult diapers weighs one metric ton.
1 dekaliter equals to 10 liters
Fill the 4 litre bucket and pour it into the 5 litre. Re-fill the 4 litre bucket and pour again. That gives you 5 litres (and 3 litres left in the smaller bucket). Empty the 5 litre bucket and put the remaining contents from the 4 litre into it. fill the 4 litre again - and pour it into the 5 litre bucket until it's full. Since you can only add 2 litres to the existing 3 litres, what you have left in the smaller bucket is... 2 litres !
The phrase is actually "A drop in the bucket". It means something so insignificant that it is not noticeable. For example, "Adding another billion dollars to the defence budget is just a drop in the bucket"
The volume in liters of a 100mm long by 50mm diameter cylinder is: 0.196 liters.
A standard mop bucket typically holds around 10-12 liters of water.
There is no standard size of bucket; the number of millilitres which fit in a given bucket vary from bucket to bucket.
The volume of a bucket of earth can vary depending on the size of the bucket and how tightly the earth is packed. However, a typical bucket of earth might contain around 10-20 liters.
Well 22,000 grams, and 250 liters.
Litres is better to measure quantities larger than a quart.
# Fill the 5 liter bucket # Pour it into the 7 liter bucket # Fill the 5 liter bucket # Fill the 7 liter bucket from the 5 (2 liters go in leaving 3 liters in the 5 liter bucket) # Empty the 7 liter bucket # Pour the 3 liters from the 5 liter bucket into the 7 liter bucket # Fill the 5 liter bucket # Fill the 7 liter bucket from the 5 liter bucket (4 liters go in leaving 1 liter in the 5 liter bucket) # Empty the 7 liter bucket # Pour the 1 liter form the 5 liter bucket into the 7 liter bucket # fill the 5 liter bucket. You now have 5 liters in the 5 liter bucket and 1 liter in the 7 liter bucket; 6 liters in all. Pour the 5 liters into the 7 liter bucket if you want all 6 liters in one container.
Depends a great deal on the size of the bucket; but, as a general rule, close to 20.
Fill the 3 liter bucket, then dump it into the 7 liter bucket. Do it again, so that now you have 6 liters in the 7 liter bucket. Then fill the 3 liter bucket, and pour it into the 7 liter bucket so that you have exactly 7 liters in the 7 liter bucket. You should have 2 liters left in the 3 liter bucket................if all that made sense :P
You could fill the 7-liter bucket and pour water into the aquarium until it is full, but that would make too much sense. If you really need to have three liters, fill the 7-liter bucket (which, although unmarked, will be larger than the 4-liter bucket) and pour it into the 4-liter bucket. When the 4-liter bucket is full, there will be three liters remaining in the 7-liter bucket.
Lego first came to the shops in the 1960's and the standard Lego set contained 25 pieces. There are many Lego sets available on the market but the standard Red Lego bucket contains 480 pieces, whereas the yellow bucket contains 607 pieces and the blue bucket contains 700 pieces. So there is no real standard as the application dictates the size of the Lego bucket.
9 liters
This method works with any such problem, as long as the two buckets' liter-capacities (or gallon capacities, etc.) have no common factors, or else the common factors are also factors of the amount you're trying to measure. Fill the 7-liter bucket, and empty 5 liters of it into the 5-liter bucket; then dump out the 5 liters. Two liters will remain in the 7-liter bucket; transfer them to the 5-liter bucket. Fill the 7-liter bucket again, and empty enough of the bucket into the 5-liter bucket to fill it. That should only be 3 liters transfered, leaving 4 liters left in the 7-liter bucket. QED.