No. A millimeter, or mm, is smaller than a meter, or m. A millimeter is actually a thousandth of a meter, so it is MUCH smaller than a meter.
You generally cannot read 0.126 mm on a ruler. You would be lucky to be able to resolve 0.2 or possibly 0.1, but not 0.126. Even if you could, and its true that 0.126 is about 1/8, the standard for accuracy in a measuring device is ± one half of a minor division - that is ± 0.5 mm, so a reading of 0.126 mm is meaningless, unless you had a much finer lined ruler and a microscope.
8,000 mm is 10 times as long as 80 cm.
27mm. 1cm = 10 mm 8.3cm - 5.6cm(56mm) = 2.7cm 83mm(8.3cm) - 56mm = 27mm
340 cm would be greater than 3200 mm as 340 cm is equivalent to 3400 mm (340 x 10). So, from there, do the math. 3400 > 3200.
.5mm is finer than .7 mm
.05 mm equals 50 μm (1000 x .05).
50 mm = 5 cm
Intake .006 (.15 mm) =/- .0019 (.05 mm) Exhaust .010 (.27 mm) +/- .0019 (.05 mm) Intake not more then .0069 (.20 mm) but not less then .0051 (10 mm). Exhaust not more then .0119 (.32 mm) but not less then .0081 (.22 mm)
.05 mm Equals .002 inchesThe answer is yes... something .002 inches, be it diameter, circumference, length, width, thickness or whatever it may be, is equal to .0508mm. Direct Conversion Formula.05 mm*1 in25.4 mm=0.002 in
An inch is 25.4 mm, so 25.4 mm - 2.54 mm = 22.86 mm. (I did that in my head, so you might want to verify it.)
6.3 mm is greater than 3.5 mm
I thick 1.5 is bigger than 1.8
from the question it can be seen that 14 > 7. so, 14 mm is greater than 7 mm. Hence,14 mm is thicker than 7 mm.
No. The units are the same (mm) so the numbers can be compared directly. 2 < 3 → 2 mm < 3 mm. → 2 mm is less than 3 mm, ie 2 mm is not larger than 3 mm.
Between 3/8 and 5/16 of an inch. Direct Conversion Formula 8.3 mm* 1 in 25.4 mm = 0.3267716535 in
less 1 cm = 10 mm 10 cm = 100 mm so 38.5 mm is 61.5 mm less than 100 mm