surface area
The surface area of a space figure is the total area of all the faces of the figure
To calculate the surface area of the equilateral triangular-based prism, you need to calculate the area of the equilateral triangle and all the other sides of the prism. The total area of all the phases will give the total surface are of an equilateral triangular based prism.
Painting co-efficents are the guideline value used to calculate the material and labour when applied in an unlevelled surfaces. For example its difficult to calculate the painting area of a 3'0 x7'0 door all along its surfaces including frames and shutters.instead it can be understood that that the co -efficient value to calculate the area is approximately 1.3 times per side.that means 3'0x7'0 = 21 sft x 1.3 =27.3 sft per side is the chargeable area and 54.6 sft for both sides while the carpentry area is 21 sft per side .the co efficeints vary from surface to surfaces like wood or steel or like 2.0 times for carved areas .
The flat side of a three dimensional solid is called the face. The total area of all of the faces is called the surface area.
In order for an object to qualify as a cube, it must satisfy these properties: * 6 faces (like a die), 12 edges, 8 corners * all it's edges must be equal length * all it's faces have equal area If the area of the cube is 294, then the sum of it's 6 faces' area is 294 So... The area of one face is 294 ÷ 6 = 49 If all it's edges have equal length, then each face is a square. The area of a square is length × length = length = length² = 49 So... the length of one edge is the square root of 49 = 7, -7 Since you are looking for a length, -7 is not an option. The length of the edge is 7
The total area of all surfaces of an object is called the surface area. It is a measure of how much exposed surface the object has.
Surface area
Surface area
surface area
surface area
surface area
Depends on the shape and size of the object.
The total surface area! The total surface area! The total surface area! The total surface area!
The total area of the two-dimensional surfaces that make up a three-dimensional object is referred to as the object's surface area. This measurement encompasses all the exterior surfaces of the object, calculated using various formulas depending on the shape, such as (2\pi r^2 + 2\pi rh) for a cylinder or (4\pi r^2) for a sphere. Surface area is important in fields such as physics and engineering, as it affects heat transfer, chemical reactions, and more.
The total area of the surface of a 3D object is called the "surface area." It represents the sum of the areas of all the faces or surfaces that make up the object. Surface area is an important measure in various fields, including geometry, physics, and engineering, as it can influence properties such as heat transfer and material usage.
surface area
It is called "the total surface area".