Area = 10*20 = 200 square units
3 feet
Length + width = half of perimeter so width = p/2 - length ie (22-12) 10 yards.
Area
8m Let the width of the table be w; then its length is w + 2. Area = length x width 80 = (w + 2)w w2 + 2w - 80 = 0 (w + 10)(w - 8) = 0 w = -10 or 8 As the width must be positive, it is 8m.
4.5 inches
To calculate the surface area of a rectangular pool, you can use the formula: Surface Area = Length × Width. First, convert the width from feet to meters (25 feet is approximately 7.62 meters). Then, multiply the length (10 meters) by the width (7.62 meters) to get the surface area: 10 m × 7.62 m = 76.2 square meters.
520 square units
The dimensions of a 10ft by 8ft area refer to its length and width. The 10ft measurement represents the length of the area, while the 8ft measurement represents the width. In this case, the area is rectangular, with a length of 10 feet and a width of 8 feet.
10 feet
The measure of the space in a rectangular figure. This could be a drawing on a page, or a rectangular room, or any other surface that is rectangular in shape. The area is measured by multiplying the length by the width and is utlimately expressed in "square" units (inches, feet, yards, miles, centimeters, etc.) For example, a room that has a length of 10 foot, and a width of 5 foot, would be said to have an area of 50 sq. ft. (10 ft length x 5 ft width)
56
2
lenght=15, width= 10
3 feet
If it's rectangular, just multiply the length times the width.
Area = Length * width A = 12 * 10 A = 120 units 2
Area = Length * Width = 10*3 = 30 square units.