answersLogoWhite

0

Typically, forcing the machine to rev too low, classic is too high a gear for the road speed.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Is stalling out on a 4 wheeler bad for the motor?

bringing any engine to an abrupt stop under load is not good. learn some clutch control.


How do you know if your fuel filter is going out?

Hard to attain and maintain hwy speeds, stalling, runs ok at idle but not under load are common issues.


Why does engine rpm not increase when air conditioner is switched on of Daewoo Matiz?

because the ecu compansates the engine speed for the load..as it does for electrical drag etc .Gone are the days of engines stalling under load!


Why do you place the system under a load to test for error?

When under a load the errors will be shown faster


If a car is able to start from a poor battery but then stalls while driving it does that indicate a bad alternator?

It can. It can also be uneven fuel supply, poor tuning. Older engines sometimes show their age by stalling under a heavy load at low rpm. Why is the battery poor?


Could it be a bad EGR valve if your 1998 Sierra hesitates under partial load and you have changed the air cleaner spark plugs and wires?

No, a bad EGR valve would cause pinging at driving speeds or stalling at idle. Have you checked the distributor cap? Fuel filter?


2L zetec mondeo 1995 misfire under load?

If only under load then......spark plug leads.


1998 Vortec 350 misses under a load?

sounds like a cranksenser.it will put your timing out when your under load .markstang


Why does my 93 lebaron stall shortly after you put a load on it?

Your 1993 Lebaron may stall under load due to several potential issues, such as a failing fuel pump, clogged fuel filter, or a malfunctioning ignition system. Insufficient fuel delivery or weak spark can cause the engine to struggle when extra power is needed. Additionally, problems with the air intake system, such as a dirty mass airflow sensor or vacuum leaks, could also lead to stalling under load. A thorough diagnostic check of these components can help identify the exact cause.


Why power generated with under frequency is harmful to the load?

Why power generated with under frequency is harmful to the load?Read more: Why_power_generated_with_under_frequency_is_harmful_to_the_load


Is the cross member under the load on a 1989 Chevy van?

Yes, the cross member is under the load on a 1989 Chevy van.


Will changing my transmission filter help stop slipping under load?

Changing your transmission filter will help in improving the slipping under load.