you can ground it right to the frame. just find a bare spot and put a screw with the ground wire
It was the starter
On a 1999 Mercury Sable : In the fuse panel by the brake pedal : ( # 17 is a 30 amp fuse for the front wiper / washer )
( fuse # 21 ) is a 20 amp fuse for the cigarette lighter on a 1996 Mercury Sable
yes they are. it's a 40 amp fuse
your amp will ground in your sound system, or through your power adder which rock.
The recommended ground wire size for a 100 amp sub panel installation is typically 8 copper wire.
The recommended size for a 50 amp ground wire in electrical installations is typically 10 AWG (American Wire Gauge).
The recommended size of the ground wire for a 60 amp electrical circuit is typically 10 AWG (American Wire Gauge).
The amp will lead a dull and empty life.
Since the resulting short circuit would be outside the amp, it WOULD NOT blow the amp.
Positive post of capacitor is connected to the heavy amp cable. The ground terminal (or case) of the capacitor is connected to the car's ground or a ground wire that leads to the car's chassis. That's it.
For a 20 amp circuit, a 12-gauge copper ground wire is typically recommended. This wire size can safely handle the current and provide proper grounding for the circuit.