0
What else can I help you with?
What if your 91 firebird formula 5.0 has a clunking noise as the car speed goes below 30MPH If you press in the clutch before it drops below 30MPH the clunking noise does not happen?
If there is a clunking noise on a 1991 Firebird Formula 5.0 when going below 30 mph, and the clunking noise does not happen when the clutch is depressed, it is probably a problem with the flywheel. The flywheel moves freely when the clutch is depressed. When the clutch is not depressed, it could be that something is rubbing on the flywheel, like the clutch plate.
Your land rover box is clunking is it the transmission box?
usually if it clunks on clutch release its the a frame ball joint on the rear axle
How would a clutch disk be checked to make sure that it is installed the right way?
If the disc is installed correctly the clutch will engage and disengage smoothly. In most cases if the disc is installed backwards the clutch disc will bind against the flywheel/crankshaft bolts and not release resulting with a clutch that doesn't disengage. More than likely if the disc was installed backwards the disc is now damaged and will need to be replaced.
Why would a brand new clutch slip?
Possibly the clutch was installed facing the wrong way, or the clutch has not had enough time to properly seat.
Should the ac compressor make squeaking and clunking noises smells like the clutch is burning but it still is working There is a dispersal of fine red dust all around the clutch housing?
No, it sounds like the compressor is failing.
If you installed a stage 3 clutch on your trans am would it give it more horse power?
No, a clutch has nothing to do with effeciency of the engine.
On A 1988 Ford F-Super Duty new clutch installed by amateurs just prior to purchase pedal is very low and very hard shifting when hot?
If you have hydraulic clutch there is air in the lines and needs bled. If not hydraulic it could be a stretched cable, a bent clutch fork, or they have installed a clutch for a different model.
How much for a tayota Celica clutch?
I live in Kansas City and paid about $800 for a new clutch, installed, on my 1990 Celica GTS.
Clutch adjustment on 91 Mazda Navajo?
It may be as simple as an auto adjustment. If you have installed a new clutch/ clutch cable. If it is auto adj all you have to do is lift UP on the clutch pedal with your foot while driving.
How do you break in a stock new clutch on a Chevy?
If it was installed properly there is no need to break it in.
How do you adjust the clutch on a 1985 bronco II?
there is really no adjustment that can be made, because it is a hydraulic system, the only thing that can be done is to have a new clutch installed.
You have a 98 cavalier 5 speed and had the clutch go out you had it replaced and it went out again in 500 miles any reasons why it would do this?
Installed incorrectly, driver who rides the clutch, clutch out of adjustment, weak pressure plate, that should have been replaced along with the clutch.
