It will take about 8 gallons of drywall primer and 8 gallons of paint.
7.7 gallons.
I work for Sherwin Williams paints and from what I understand it is our paints that paint The White House. The paint is a special mix. Everyone who comes in contact with the paint has to go through a background check.
If 169 is floor area, then you are talking about roughly 430 square feet of wall. I would paint that with a bit less than 2 gallons.
Covers 25 sq ft per gallon according to mfgr, so about 7.5 gallons.
Depends on the pail, many are different sizes.
5 gallon
3 gallons
A pail is not a standard size.
There are 2 answers. The type of pail or bucket used while washing a car or your floor, is typically two or 2 and 1/2 gallons. There's also an imperial unit of dry volume called a pail or a quarter, which is 8 bushels (64 gallons).
The volume of a pail can vary depending on its size. A typical pail usually holds around 10 to 20 liters of liquid.
5 gallons
It will take about 8 gallons of drywall primer and 8 gallons of paint.
About 3,000 gallons of paint were used to paint the White House.
Easy. Fill the 7gal pail to the full mark (7 Gallons) with water. Then pour, from the 7 gallon pail, water into each of the 3 gallon pail up to the full mark. The remaining water left in the 7 gallon is 1 gallon. Pour this gallon into the aquarium. Fill the 7 gallon pail with water, again to the full mark, and then add to the aquarium. 1 Gallon + 7 Gallons = 8 Gallons.
Just over 20 gallons
Fill the 3 gal pail and pour into the 5 gal pail. Refill the 3 gal pail and pour two gallons of it into the 5 gallon pail - filling the 5 gallon pail and leaving 1 gallon in the 3 gallon pail. Dump out the 5 gallon pail and pour the remaining 1 gallon from the 3 gallon pail into the 5 gallon pail. Fill the 3 gallon pail one more time and pour that into the 5 gallon pail with the 1 gallon already in it and you have 4 gallons.