answersLogoWhite

0

If you can access the internal portion of the broken pipe, insert a hacksaw blade and cut through the threads at a perpendicular angle. Be careful not to damage the underlying threads in the pipe in the wall. Then use a flat bladed screwdriver to collapse the damaged pipe at the cut you made, by prying. You may have to make several cuts.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

Is there a special tool to remove the threaded portion of a shower head pipe that has broken off inside the wall?

Yes. You need a 1/2 inch Easy Out.


What is externally threaded jewelry?

The threading (spiral screwy part), is on the outside of the barbell, instead of actually inside the barbell (internally threaded).


What is the abbreviation of Suggestions?

There's not an abbreviation for suggestions, maybe you can just write suggestions inside of abbreviating it. i seached an A-Z list of abbreviations & an abbreviation for suggestions wasn't on there because everything cannot be abbreviated.


What is cross threaded mean?

Exactly what it says threads are crossed inside the female fitting


How do you increase water intensity at shower head?

Remove the restrictor found inside the threaded part.


What makes up the inside portion of your bones?

marrow


How do you replace the threaded pipe for the oil pan suburban 1988?

The pan has to be removed and a new threaded nut welded on the inside of the pan. On an '88 I would just change the pan. After market pans aren't too expensive.


Why have your uggs not got ugg written on the sole?

Its inside your shoe or threaded on the back or when you bought them there was a sticker that had UGG on it or in another place


How do I properly install a threaded headset on my bicycle?

To properly install a threaded headset on your bicycle, follow these steps: Remove the old headset by loosening the locknut and removing the fork. Clean the head tube and fork threads. Grease the threads on the fork and inside the head tube. Slide the fork into the head tube and tighten the locknut. Adjust the headset bearings for smooth rotation. Secure the headset by tightening the locknut. Test the headset for proper function before riding.


How do you remove the rear speakers of a 1996 Geo Prizm?

You have to remove the rear shelf, the rear speaker covers are attached to the shelf. You can see the connectors underneath from inside the trunk. Be carefull not to scratch your defroster lines in your back window when removing the shelf. You may need only pop up the front portion to access the speakers without compeletly removing the shelf. Removing the backseat if its a non LSi model might help.


What are the differences between threaded and threadless bicycle headsets?

Threaded bicycle headsets have threads on the steerer tube and inside the head tube, allowing the headset to be screwed into place. Threadless bicycle headsets do not have threads and instead use compression to secure the headset in place. Threadless headsets are typically lighter and easier to adjust compared to threaded headsets.


What is the part within the interior or internal portion?

The component inside the interior or internal portion of something is called the "interior element" or "internal component." It is the part that is located within the structure or body of an object.