answersLogoWhite

0

code 12 means "no mulfunctions are recorded by ECM",no problems founded.You can not reset this code.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How do you reset warning lite code on suzuki sx4?

how to reset suzuki sx4


How do you reset the computer of suzuki Boulevard m109?

how i reset code on m109r suzuki


How do you turnoff check engine light 1998 suzuki sidekick?

use a scan tool use a code reader either press reset. or pull dome fuse with 2min , put back. its reset.


1997 suzuki sidekick how to reset service engine soon light?

plug in scan tool or code reading into OBD2 DLC 16 pin connector above right knee. press reset DTC. done.


Does anyone have the code to reset your radio on a 2005 suzuki forenza s?

1165


How do you reset radio codes for Suzuki Verona 2004?

To reset the radio code for a 2004 Suzuki Verona, you typically need to turn on the ignition and the radio. If the radio displays "CODE" or "LOCK," you'll need to enter the correct code, which is usually found in the owner's manual or on a card provided at the time of purchase. If you don’t have the code, you may need to contact a Suzuki dealership with your vehicle's VIN for assistance. After entering the correct code, the radio should function normally.


How do you find the reset code for a replacement radio for a 1990 ls400?

Go to a dealer


Check Engine light is on in 1993 suzuki sidekick?

place the Diagnostic jumper and read out the flashes. http://www.kick-fix.com/CEL/CEL.html this looks complex but it covers 89 to 95 FED and California cars. then post your DTC errors here. code 12 is normal , but you will have others. http://www.suzuki-forums.com/suzuki-sidekick-escudo-vitara-geo-tracker/


How do you reset program the radio in the 2002 suzuki grand vitara after a battery change?

To reset the radio in a 2002 Suzuki Grand Vitara after a battery change, turn on the ignition and then the radio. You may see a message like "CODE" or "SEC" indicating that the radio is locked. If you have the security code (usually found in the owner's manual), enter it using the preset buttons. If you don't have the code, you may need to consult a dealership for assistance.


What is a code P0400 in the diagnostic for a Suzuki Sidekick 97 1600 CC?

P0400 is an EGR code. Usually caused by carbon blocking some of the the vacuum ports. It can also be caused by a blocked vaccum hose, misrouted hoses, or even a bad ECM


How do you reset the radio on a suzuki Verona I have the code.?

Get the code off the radio card and punch in the numers on the radio pre set buttons with the radio and ign key on and the radio will come back to life.


What is the code for the sidekick in club penguin?

spydekick