There's a range of products in each category and incandescent lumen output degrades more quickly than halogens due to typically short lamp life. Try this for a start. "14-17.5 lumens per watt for standard "A19" 120 volt 60 to 100 watt incandescents, and typically 16 to 21 for most halogen lamps." Conceivably, you could get 210 lumen output in a 10w halogen and as much as 1050 lumens out of a 60w incandescent. MR16's list beam power, rather than lumens because they are so focussed and directional.
The lumen output of a 150W incandescent bulb is typically around 1600 lumens.
The lumen output of a 150-watt incandescent bulb is typically around 2,600 lumens.
It depends on the specific lamp. The packaging the lamp comes in should tell you what the lumen output is. This in a common question as people want to compare LED replacements. You can use 600 lumen as a good guide for comparison for a 50 Watt halogen.
The output of bulbs varies. A typical output of a 60W incandescent bulb is 680 lumens.
10-11 lumens per watt for incandescent bulbs 13-14 lumens per watt for halogen 50-60 lumens per watt for fluorescent
The energy consumption of a modern Cree XP-G or XM-L based flashlight with 170 lumen output can be as low as 1.4 watts with 120 and more lumen per watt. The light output will be approximately equal to a 20 W tungsten incandescent light bulb or a 10 W halogen light.
It varies from about 600 to 1100 lumens. Typically the higher the lumens output, the shorter the lifespan of the globe. Have a look at this list of globes for purchase whih shows wattage and lumens: http://1000bulbs.com/category/75-watt-incandescent-standard-shape-light-bulbs/
The lumen output of a 150 watt bulb can vary depending on the type of bulb. However, as a general guideline, a 150 watt incandescent bulb typically produces around 2600-2800 lumens.
Should be about 850 lumens. The same brightness is produced by a 15 watt CFL.
Generally lumen is a measure of the total amount visible light form a lamp or light source. LEDs are about the same as CFLs, producing about 50 lumens per watt, compared to 10 lumens for incandescent bulbs or 13 lumens for halogen.
Halogen lamps run hotter than conventional incandescents, and as a result of their hotter filaments, emit a whiter light with more of the light in the visible range, and less in the infrared. A typical 50W halogen emits between 800 and 950 lumens.
The lumen output of a GU10 bulb can vary depending on the specific bulb being used. On average, a GU10 bulb typically produces around 400-500 lumens. It's important to check the packaging or specifications of the specific GU10 bulb you are using to know its exact lumen output.