0
How can you connect a big 4 gauge power wire into your 350w amp?
Wiki User
∙ 14y ago
use 4 gauge spade crimp connectors
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How to wire an amp gauge?
To wire an amp gauge, connect one terminal to the positive battery post or the output terminal of the alternator. Then, connect the other terminal to the main power distribution point on your vehicle, such as the main power feed to the fuse box. Make sure to use the appropriate gauge wire for the amperage of your electrical system to prevent overheating and potential fire hazards.
What is the gauge of wire for a 13.8 dc power cords?
You need to know the current to determine the wire gauge.
How do you connect radio to ford connect van?
Which wire is the power
Is an audio signal affected by wire gauge?
Absolutely for maximum power transfer impedance's are to be matched a low wire gauge will insure that the power is not dissipated on the wire as appose in the speakers.
What is a good wire gauge for a car radio?
A good wire gauge for car radios is 18 gauge. This wire runs between the radio and its power supply from the vehicle.
Can you safely connect a 14 gauge 3 wire heater to a extension cord rated 16 gauge 3 wire?
16 Ga wire is smaller than 14 Ga. The answer is absolutely NO!
Which side of the White neutral wire do you connect the Black power wire?
The neutral wire and power wire are never connected together.
What is the orange wire on your fuel pump harness for a 1990 ford f150 used for Is it a power wire?
It is the ground wire for the fuel pump. The Red wire is the power wire for the pump. the dark blue is the signal wire for the gauge and the black is the ground for the gauge.
How do you wire a sub in a Saturn sc?
Connect the sub woofer to the equalizer or amplifier. The positive wire will need to be connected to a power source. Connect the ground wire. Connect the auxiliary wire to the amplifier.
You are hooking up a 220v air conditioner you were told to use 10-2 wire how do you hook this up?
10-2 wire refers to 10 gauge, 2 conductor wire. Youshould use wire that is 10 gauge or larger (8 gauge, 6 gauge, 4 gauge, 2 gauge). The larger the wire, the more it will cost. most people install using the smallest size permitted, which in this case is 10 gauge. The are specifying the wire size to ensure that you do not connect the air conditioner to electric power using wire that is two small. If you are having problems with this type of question, you should consult an licensed electrician for help in connecting your air conditioner.
What will happen if you connect your remote wire to the power wire of your amplifier?
Amp always on
What gauge of wire to connect electric dryer?
You need a 3 conductor #10 cable. A #10 wire is rated at 30 amps.
