a rod doesn't go on the camshaft. Perhaps you have your terminology mixed up?
a camshaft moves the rods up and down as to open and close the valves. a rod rides on the camshaft and the lobes are oval, so every time it turns the rods are pushed up and when the lobe is down they are closed. this happens very fast, the rod rides on camshaft and pushes on rocker arms to open and close valves.
Rod Munoz goes by Rod Gee.
Mounted to the bottom of the block and rear main journal and extends its pickup tube into the engine oil pan. It is driven by a rod that goes straight up from it to the distributor. Distributor driven by the camshaft.
To determine the linear charge density of a rod, divide the total charge on the rod by the length of the rod. Linear charge density is measured in coulombs per meter.
push rod or tap its. It would be a cam lobe that moves the lifter.
To determine which way tightens the truss rod in a guitar, turn the truss rod wrench clockwise to tighten and counterclockwise to loosen.
Rod Maiorano goes by Rod, Roddy Rod, and Don Vito Corleone.
Rod Rideau goes by CatDaddy.
Rod Koch goes by Skipper.
Rod Marley goes by The Vicar.
Rod Keller goes by Roddy.
Slack adjusters are used to adjust for wear on s-cam brakes on heavy and medium sized trucks. A lever, connecting the brake chamber push rod with the foundation brake camshaft