answersLogoWhite

0


Best Answer

sounds like a 275 gal oval residential tank

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the volume of a fuel oil tank measuring 44 X 27 X 62?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is the volume of a fuel oil tank measuring 36 X 60 X 27?

58,320 units3


How many gallons of fuel oil does one inch equal in a 1000 gallon fuel tank?

Here is a tank chart that should help. Generally, the oil tank has a bit of "headroom" at the top, so, for example, a 275 gallon tank only holds about 256 gallons of useable fuel. Check with your local fuel company to determine the useable fuel volume your tank contains. http://www.sippin.com/oil%20tank%20measure%20chart.htm


What is the volume of an oil tank measuring 48x24x60?

5760 cu/ft ( that's 48ft x 24ft x 60ft divided by 12)


How is oil getting into your fuel tank?

Someone is putting it there. There is no way for oil to get from the engine to your fuel tank by natural means. Literally, if you have oil in your fuel tank, someone is sabotaging your vehicle by putting the oil there.


What is the m3 volume of an oil tank measuring 1.5 meters height x 4meters length x 2.5meters width?

15 cu m


What would the liquid volume of an oil tank measuring 70 feet diameter x 8 inches high?

A tank measuring 62 inches by 46 inches by 44 inches has a volume of 125488 cubic inches, which is 10457.3 cubic feet. That equals 78,226.286 in US gallons It equals 65,137.007 in Imperial gallons


How many gallons of oil is 23 inches in a 1000 gallon underground fuel oil tank?

To calculate how many gallons of oil are in a tank at a specific depth, you need to know the dimensions of the tank. You would typically use the formula for the volume of a cylinder (V = πr^2h) where r is the radius of the tank and h is the height of the oil. If you know the measurements, you can substitute them into the formula to find the volume of oil at 23 inches deep.


How much oil is left in a 1000 gallon underground fuel tank when the depth is 5 inches?

To determine the amount of oil left in the tank, you would need to calculate the volume of oil in 5 inches of the tank. First, find the volume of one inch of oil in the tank by dividing 1000 gallons by the total tank height in inches. Then, multiply this volume by 5 inches to find the amount of oil remaining in the tank.


Can oil ruin your gas tank?

Some truckers use the oil from an oil change as added fuel in the tank. In this case it will Not ruin your tank


Where is the oil tank on a mercury 35 hp motor?

In the fuel tank


How to get Oil out of fuel tank in an Audi 1.8T what to do?

The question is how did oil get in the fuel tank? If there was very little oil put in the tank as in less than a couple of quarts then just fill the tank full and drive the car. The oil will be burned with the fuel and will do no harm. If there was more than a couple of quarts, you can siphon it out with a hand pump. You can get enough out to then fill the tank and drive the rest out.


Can we put engine flush oil into fuel tank?

No, the flush oil is to clean the parts of the engine that are oiled. If you put it in the fuel tank it will block up tour fuel filters and your carburettors.