0
What would make water shoot from a hole on the engine block behind the water pump?
sounds like the weep hole , time for new water pump ?
It's not the waterpumb, the problem was the part the water pump mounts to. It look like it might have been dropped or hit with a hard tool during installation. The hole is a broken edge of that part, making a broken seal so it needs to be welded or sodder to work correctly. ?
It could also be a block or head freeze out plug that is old or damaged. They are very inexpensive and fairly easy to install. To remove an old one, use a hammer and screwdriver and pick one edge and punch it in. Use a pair of pliers and pull it back out sideways or drill a hole through the center and use a dent puller slide and pull that way. To install a new one, find a socket that fits inside of it almost perfectly and as carefully as possible, tap the new one in as straight as you can. Clean the inner surface first with steel wool to remove any deposits and give the new one a good seal.
What else can I help you with?
On a 1991 Chevy cheyanne is the water pump behind the fan?
behind fan,bolted to front of engine block
Where is the water pump on a 1995 Chevy Silverado?
It is located behind the fan and mounted to the engine block with 4 bolts.
Where can you find the engine size on a 78 Chevrole Impala?
On the engine block on the top front just behind the water pump on a machined surface the code will be stamped.
How do you change the water plug located behind engine block on a 1991 silverado v6?
There is 2 of them in the back of the engine. You will have to pull the engine are remove the transmission and fly-wheel to get to them. It is what ever is the easiest for you.
What is wrong when water is leaking behind the water pump where it connects to the block after you have already replaced it with a new water pump?
If the cork gaskets are not damaged then the engine block may be cracked. Check to see that the cork gaskets are indeed in place and not damaged.
Does water remain in engine block when cars not running?
There is coolant in the engine block when the engine is not running. The engine block, heater, hoses and radiator remain full when engine is not running.
Where is the engine water seal located at on the motors block?
On the side of the engine block on bottom of the motor
When cleaning the exterior of an engine block can cold water make an engine block crack when the engine is at operating temperature?
It should not
What Locks up an engine?
Lack of water in you engine block. Lack of oil in your engine block. Can cause piston siege.
Where is the water pump on a 1992 buick park avenue located?
Passenger side bolted right to the center of the engine block behind the serpentine belt.
Where is the thermostat on a 1990 Nissan 240 Sx?
it is on the front of the engine block behind the fan. looking at the car from the front it is to the left of the water pump. there will be a three bolt adapter going from the engine block to the radiator. by removing the three bolts you will find the thermostat there.
What do you need to do when water freezes in car?
As in the engine? Don't attempt to start it. Water expands when it freezes. If the water in your engine block has frozen there is a good possibility that damage has been done to the block.
