To round 7.595 to one decimal place, we look at the digit in the second decimal place, which is 9. Since 9 is 5 or greater, we round up the digit in the first decimal place, which is 9+1=10. Therefore, 7.595 rounded to one decimal place is 7.6.
10% when expressed in decimal form is 0.1. The first decimal place right to the decimal is called a tenth
10
The decimal point moves one place to the left when dividing by 10.
To write 37 thousandths as a decimal, you would place the decimal point three places to the left of the digit 7 in the thousandths place. This would result in the decimal 0.037. This is because each place value to the right of the decimal point represents a power of 10 that is a negative exponent, with the first place to the right being 10^-1, the second place being 10^-2, and so on.
The number 6.527314 to two decimal places is 6.53. To round a number to two decimal places, you look at the third decimal place. If it is 5 or greater, you round up the second decimal place. If it is less than 5, you leave the second decimal place as is. In this case, the third decimal place is 7, so we round up the second decimal place from 2 to 3.
look to the place next to it on the right and if its 4 through 0 round down and if its 5 though 10 round up
97.1
the answer is 39 because when you round any number when its over 5 you round up and 1-4 you round down and because the 1st decimal place is fine you round to 10 and then because it goes to ten it makes it 39
It is not clear where the factors came from!
To the left
The hundredths place is two decimals to the right of the decimal point, so to determine the nearest hundredth you have to look at the number that is 3 places to the right of the decimal point. If this number is 0-4, round the number in the hundredths place down, or if it is 5-9, round it up. Since in this case the thousandths place (which is 3 digits to the right of the decimal) is 9, we would round the hundredths digit up to 10. Since we can only have one number per digit, we change the first 9 to a 0 and change the 1 to a 2.
10% when expressed in decimal form is 0.1. The first decimal place right to the decimal is called a tenth
10 th place
3.14159The 9 was just in-caseHere is the value of PI to 10 decimal places:3.1415926536For four decimal places keep in mind you want to round the 5 up, so 3.1416.Answer+MoreTo the 18th decimal place pi is 3.1415926535897932383.141592 is very close to 3.1416 so pi to the fourth decimal place is in fact, 3.1416.
To estimate, you round the number to the nearest 10 and add, subtract, divide, or multiply. If the number is a decimal (ex. 12.132), you would round it to 12, and then round that to 10.
The tenths place is the place on the right of the decimal. you would round it up or down depends in on the numbers following it. If the number is under 5, you keep the number the same. If the number is five or higher, you round up to the next number, which in this case would be 10. the nearest tenth is 9.