Multiply width by length to get the area. The answer would be 100 square feet.
100 SF or 34 Sq. Yards
201.6 square feet.
200 square feet
a square in siding or roofing is 100 square feet (10x10) most house are between 10 and 14 square of siding
a square measurement is the size of the width times the height of something so something 10' by 10' would be 10x10=100 so 100 square feet.
To cover a 10x10 deck with 1x4x10 boards, you'll first calculate the area of the deck, which is 100 square feet. Each 1x4 board (which measures 3.5 inches wide and 10 feet long) covers approximately 2.92 square feet. Therefore, you'll need about 34 boards (100 ÷ 2.92 ≈ 34.25) to cover the entire deck, rounding up to account for cuts and waste.
18 10x10-inch tiles.
10x10 = 100ft²
10 feet*10 feet=100 square feet
100 square feet 10x10= 1 square of siding
A `square` is usually 10X10 feet, or another way of putting it is, 100 square feet (100 feet long by 1 foot wide).
one hundred
If the 10x10 distances are also in feet, the square footage is 10x10 = 100 square feet. If the room size is actually measured in other units, you need to give those units in the question.
A square of siding is a 10x10 foot section , so it's 100 square feet.
The volume of a 10x10 square foot room is 1,000 cubic feet. To calculate this, you multiply the length (10 feet) by the width (10 feet) and the height (assuming a standard 8-foot ceiling) to get the total cubic footage.
Six square in construction terms means six hundred square feet. A square is a 10x10 area, or 100 square feet. Hope that helps.
100 square feet. A= lxw A= area l=length w=width 10x10= 100.