To find the area of a square plot, you simply multiply the length by the width. In this case, a 7x7 meter plot would have an area of 49 square meters. This is because 7 meters multiplied by 7 meters equals 49 square meters.
Since there are three measures given, it is reasonable to assume that the question concerns a triangular plot with sides of 70, 100 and 146 units. Assume that these measures are in feet. In that case, the area is 3110.82 square feet.
Simply plot the irrational number at it's approximate location on the number line and label the irrational number. For example, if you were to plot pi on the number line, you would plot it at about 3.14 and label it with "π" (the pi symbol, if it doesn't show up) Another example is if you want to plot the square root of 2 on the number line. You would plot it at around 1.414 and label it with "√2"
1
yes
An intriguing plot
14700 sq meters
10x10=100. So there are 100 square meters in a 10x10 meter plot of land.
The answer would be 210 square meters.
The size of a plot can vary depending on the location and local regulations. In general, a plot of land is typically measured in square meters or square feet. The specific size of a plot can range from a few hundred square meters to several thousand square meters. It is important to check with local authorities or a land surveyor to determine the exact size of a plot in square meters.
To convert square meters to plots, you'll need to know the size of a plot in square meters, as this can vary by region. For example, if one plot is defined as 1,000 square meters, you would divide the area in square meters by 1,000 to get the equivalent in plots. Simply use the formula: number of plots = area in square meters / size of one plot in square meters.
To determine the area of a plot in square meters, you need to know its dimensions (length and width) and multiply them together. For example, if a plot is 10 meters long and 5 meters wide, the area would be 50 square meters (10 m x 5 m = 50 m²). If you have specific dimensions for a plot, you can provide them for a precise calculation.
depends on how big the plot is
A 50x100 meter plot of land has an area of 5,000 square meters, calculated by multiplying the length (50 meters) by the width (100 meters). However, if you're asking about the perimeter, it would be 300 meters, calculated as 2*(50 + 100). Therefore, the answer depends on whether you're referring to area or perimeter.
To find the area of a plot that is 50 meters by 100 meters, you would multiply the length by the width. Therefore, 50 meters multiplied by 100 meters equals 5000 square meters. So, there are 5000 square meters in a plot that is 50 by 100 meters in size.
700
Answer: 30 m² = 322.917 ft²
There are 100 plots of land in 10 hectares if each plot is 100 square meters. This is calculated by dividing 10 hectares (100,000 square meters) by 100 square meters per plot.