One biswa is typically equivalent to approximately 2,500 square feet. However, the exact area can vary depending on the region, as the measurement of biswa can differ in different parts of India and neighboring countries. In some places, it may be defined as around 2,000 to 2,400 square feet. Always check local definitions for precise measurements.
Near about 7 biswa.
10 sqare feet is an area so it covers 10 square feet.
10 sqare feet is an area so it covers 10 square feet.
One biswa is typically equivalent to approximately 0.025 acres or about 1,089 square feet. In terms of yards, this translates to approximately 363 square yards. However, the exact measurement can vary depending on regional definitions, as "biswa" may have different sizes in different areas.
In the context of land measurement, "biswa" is a traditional unit used in some regions of India and Nepal, and "guj" typically refers to a specific agricultural measurement. The exact conversion can vary by region, but generally, one biswa is equivalent to about 1,600 square feet. If you're looking to convert biswa to guj, you'll need to know the specific size of a guj in your area, as it can differ. For an accurate conversion, consult local land measurement standards.
4238/3200 = 1.324375 per sqare foot
13^2 = 169.
The answer depends on where you are going from!
A bigha is not a standard measure. It can be as small as 600 sq feet in Madhya Pradesh or as large as 9150625 in Central India - much the same part of the country!
The amount of paint required will depend not only on the area but also on the coverage of the paint, the porosity of the surface to be painted, the degree of preparation as well as other factors.
The answer will depend on the width of the tape.
This can not be answered without more information. You need to know the width of the item being measured by length (which is what lineal foot refers to). If it is a roll of carpet 25 feet wide, you would need 100 lineal feet to cover 2500 sqare feet. If it is a 2.5 foot counter top, you would need 1000 lineal feet. Divide 2500 by the width in feet of the material being measured and you will get the number of lineal feet required.