answersLogoWhite

0

What else can I help you with?

Related Questions

Every network adapter has a 48 bit 6 byte number hard-coded on the card by its manufacturer that is used to identify the adapter on the network this number is called the?

MAC Address


What do the first three octets mean in mac address?

The UAA, or Universally Administered Address, is the most commonly used type of MAC address. This address is assigned to the network adapter when it is manufactured. The first three octets define the manufacturer, while the second three octets vary and identify the individual adapter. All network adapter manufacturers have their own code, called the Organizationally Unique Identifier (OUI).


Another term for lan card?

It can also be called a network interface controller, network interface card, network adapter, and LAN adapter.


What is network adapter?

Definition: A network adapter interfaces a computer to a network. The term "adapter" was popularized originally by Ethernet add-in cards for PCs.Modern network adapter hardware exists in several forms. Besides traditional PCI Ethernet cards, some network adapters are PCMCIA devices (also know as "credit card" or "PC Card" adapters) orUSB devices. Some wireless network adapter gear for laptop computers are integrated circuit chips pre-installed inside the computer.Windows and other operating systems support both wired and wireless network adapters through a piece of software called a "device driver." Network drivers allow application software to communicate with the adapter hardware. Network device drivers are often installed automatically when adapter hardware is first powered on.A few network adapters are purely software packages that simulate the functions of a network card. These so-called virtual adapters are especially common invirtual private networking (VPN).Also Known As: NIC, LAN card


What is the unit of information called when a network adapter adds the source and destination MAC address to the segment of data before it is transmitted on the network?

Packet


What is the build in identifying address coded into the NIC?

The built-in identifying address coded into a Network Interface Card (NIC) is called a MAC address. It is a unique identifier assigned to the hardware by the manufacturer and is used to identify devices on a network. MAC addresses are typically 48 bits long and are displayed in hexadecimal format.


What are the components of a network card?

A network card, or network adapter as it is sometimes called, allows a computer to connect to a network of other computers. These devices will usually have both a physical layer and a data link layer. Ethernet devices will most often have an 8P8C socket where the network cable can be connected.


How can I connect a washing machine to a sink?

To connect a washing machine to a sink, you can use a special adapter called a faucet adapter. This adapter allows you to attach the washing machine's inlet hose to the sink's faucet. Make sure to follow the manufacturer's instructions and secure the connections properly to avoid leaks.


What is an ID number assigned to the wireless network which allows two devices to validate with each other?

It's called "MAC address".


What is a mac address called?

Media Access Control address. This is the hardware/vendor set address of a Network Interface Card. The format is xx:xx:xx:xx:xx:xx With the first 3 hexadecimal digits specifying the manufacturer. Network routers and switches use this address to control traffic to a Network Interface card, it is often tied to a user assigned IP Address (b.b.b.b, 4 octets, usually decimal, 0-255 each).


How convert coaxial cable signal to ethernet signal?

To convert a coaxial cable signal to an Ethernet signal, you can use a device called a coax-to-Ethernet adapter or a MoCA (Multimedia over Coax Alliance) adapter. This device connects to the coaxial cable and translates the RF signal into Ethernet data, allowing you to connect it to your router or network device via an Ethernet cable. Simply connect the coaxial cable to the adapter, then use an Ethernet cable to link the adapter to your network hardware. Ensure that the adapter is compatible with your internet service provider's coax signal.


Which type of addressing is found at the OSI Data Link Layer?

Physical and MAC addressing are found in the OSI layer 2?