The digit 4 is valued at 4 hundredths
The places are always the same no matter what the digits are. The value is obtained by multiplying the place times the digit. Starting from the right, the places in an 8-digit number are ones, tens, hundreds, thousands, ten thousands, hundred thousands, millions and ten millions.
The tens place value is the second digit to the left of the decimal point. The decimal point is always to the right of the ones digit; in a whole number, the decimal point is "hiding" (not written) after the ones digit. In 3040 the tens digit is the 4.
There is no digit 4 in 960. 960 divided by 4 is 240.
No because 0.45 is greater than 0.045
The digit 4 is in the tens place, and has a value of 40 (forty).
A number does not have a place value - a digit within the number has. For example 234 has no place value but the digit 4 has a place value of 40.
In the number 5.14, the digit 4 is in the hundredths place. This means that the value of the digit 4 is 4/100 or 0.04. The place value of each digit in a decimal number is determined by its position relative to the decimal point.
What digit in the place with the greatest value is equlal to 4+0
Place value only makes sense for a single digit - not a 4-digit number!
The 4 is in the tenths place value.
Write the place and the value of the underlined digit. 95463 The 4 is in the hundreds place and has a value of 400.
In the number 4,567, the place value of the 4 is in the hundreds place. In the place value system, each digit's position determines its value based on powers of 10. The hundreds place represents the digit's value multiplied by 100.
The value of a digit: In 12,345 , the value of the digit 5 is 5 and the value of the digit 1 is 10,000. Place value: In 13,563 ,the place value of the digit 3 is thousands and the place value of the digit 6 is tens. The value of a digit is its value, as in 0-9 The place value of a digit is its value multiplied by its place (column) value which is dependant upon where it is in the number. In the units column, the place value is 1 In the tens column, it is 10 in the hundreds column it is 100 in the tenths column it is 1/10 So in 123.4: The digit 1 has value 1, but place value 1 x 100 = 100 (one hundred) since it is in the hundreds column The digit 2 has value 2, but place value 2 x 10 = 20 (twenty) since it is in the tens column The digit 3 has value 3, but place value 3 x 1 = 3 (three) since it is in the units column - in this case (only), its value and place value are the same. The digit 4 has value 4, but place value 4 x 1/10 = 4/10 (four tenths) since it is in the tenths column.
Hundredths
Tenths
Place value is tens and value is 40