Wiki User
∙ 10y agoIf the weight of the flask and compound are 703.55 and the flask weighs 345.8, then the compound weighs 357.75 grams. Then the density in grams per milliliter is 1.59 g/mL (357.75 g / 225 mL). There are 1000 milliliters in one liter, so the density is also .00159 g/L.
Wiki User
∙ 10y agoThe mass of carbon tetrachloride = 703.55 g - 345.8 g = 357.75 g
Density = mass / volume = 357.75 g / 225 ml = 1.59 g/ml
To convert to g/L, multiply by 1000:
Density in g/L = 1.59 g/ml * 1000 = 1590 g/L
Areesha Mohammadi
1.59g/cm
It is not common to fill blimps with carbon dioxide because it is not as buoyant as helium, which is the most common gas used to fill blimps. Carbon dioxide is heavier than air and could affect the lift and stability of the blimp. Additionally, carbon dioxide is flammable and can be dangerous if not handled properly.
Carbon dioxide can be poured because it exists as a gas at room temperature and pressure. When released from a pressurized container, it expands and fills the space, allowing it to flow out like a liquid.
To find the average density of the can and its contentsWeigh the can of soda pop (mass) and then divide by the number of cubic centimeters in the can (volume). Density = mass/volume.To find the density of the aluminum canEmpty the can completely, weigh it, then place it in a filled liquid container to determine the volume of the aluminum. Divide as above to find the density of the aluminum (should be approximately 2.7 grams per cubic centimeter).
To find the average density of the can and its contentsWeigh the can of soda pop (mass) and then divide by the number of cubic centimeters in the can (volume). Density = mass/volume.To find the density of the aluminum canEmpty the can completely, weigh it, then place it in a filled liquid container to determine the volume of the aluminum. Divide as above to find the density of the aluminum (should be approximately 2.7 grams per cubic centimeter).
The balloon filled with air will remain buoyant and float towards the ceiling in a room filled with carbon dioxide. This is because air is less dense than carbon dioxide, creating a buoyant force that allows the balloon to float.
cyclohexane is a liquid so it may be filled in a flask of known volume and may be weighted out ... the ratio of mass and volume represents the density....
Helium-filled balloons typically last longer than carbon dioxide-filled balloons. Helium is a lighter gas that causes balloons to float higher and stay inflated longer due to its lower density. In contrast, carbon dioxide is heavier and escapes balloons more quickly, leading to a shorter lifespan.
It is not common to fill blimps with carbon dioxide because it is not as buoyant as helium, which is the most common gas used to fill blimps. Carbon dioxide is heavier than air and could affect the lift and stability of the blimp. Additionally, carbon dioxide is flammable and can be dangerous if not handled properly.
To find the mass of carbon dioxide in the graduated cylinder, you first need to calculate the volume of the cylinder using the formula for the volume of a cylinder (V = πr^2h). Then, multiply the volume by the density of carbon dioxide to find the mass (mass = volume x density). Finally, convert the mass to the appropriate units if necessary.
approximately 0.8 bar
To find the density of aluminum, you need a sample of aluminum, a scale to measure its mass, and a ruler to measure its volume. By dividing the mass of the aluminum by its volume, you can calculate the density of aluminum.
The density of a non-uniform object can be found by using its mass and volume. The volume can be measured by placing the object in volumetric glassware filled with water. The increase in volume is equal to the volume of the object. The object can then be weighed using a scale. The density of the object will be given by the ratio of mass / volume.
Density of any balloon depends on the material of the balloon and how much the balloon is filled.
The density of a balloon depends on the gas it is filled with. For example, a balloon filled with helium is less dense than the surrounding air, causing it to float. The density of a balloon can also be affected by additional factors like the material it is made of and any objects it contains.
The balon filled with helium will cause more static,a ballon filled with carbon dioxide may be dangerous.
A soda can will sink if it is filled with liquid because the overall density of the can plus the liquid is greater than the density of water. However, if the can is empty or filled with air, it will float as the overall density is less than that of water.
The abdomen is filled with gas, usually carbon dioxide, to help the surgeon view the abdominal cavity.