answersLogoWhite

0

Don't worry about the extra wires, the trailer with a four wire plug doesn't use them. The extra wires left over are for electric trailer brakes, a 12 volt power supply from the tow vehicle and a rarely used back up light or third brake light. The trailer with a four wire plug only uses the white wire for ground, the brown wire for the running lights, the yellow wire for the left signal and brake and the green wire for the right signal and brake.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What is GPS trailer tracking?

A gps trailer tractor is a gps that you connect to your trailer when you go on the road and need to navigator but trailer. These are good to have if you travel alot with your trailer.


How can I connect a bike trailer to my bicycle?

To connect a bike trailer to your bicycle, first attach the trailer's hitch to the rear axle of your bike. Make sure it is securely fastened. Then, connect the safety strap to the frame of your bike for added security. Finally, test the connection by gently pulling on the trailer to ensure it is properly attached before riding.


How can I connect a bike trailer to my bike?

To connect a bike trailer to your bike, first attach the trailer's hitch to the rear axle of your bike. Make sure it is securely fastened. Then, connect the safety strap to your bike frame for added security. Finally, test the connection by gently pulling on the trailer to ensure it is properly attached before riding.


What is a Glad Hands on a trailer truck?

They are what's used to connect the trailer to the trailer supply air lines.


How do you attach a trailer to a lorry on GTA IV?

Unfortunately, you cannot connect the cab of a lorry to the trailer's as they are stationary and will not move.


How do you measure trailer tongue weight?

at a public scales, weigh the vehicle without the trailer connected, connect the trailer and pull back on the scales leaving the trailer tires off the scale. The difference in the two weights is the tongue weight


How do you attach a trailer to a bike?

To attach a trailer to a bike, first, make sure the trailer is compatible with your bike. Then, attach the trailer hitch to the rear axle of the bike. Secure the hitch in place and make sure it is tight. Finally, connect the trailer to the hitch and ensure it is securely attached before riding.


How can I safely attach a bike trailer to my bicycle?

To safely attach a bike trailer to your bicycle, follow these steps: Ensure your bike is compatible with a trailer hitch. Attach the hitch to the rear axle of your bike. Connect the trailer to the hitch securely. Check that the trailer is level and not leaning to one side. Test the connection by gently pulling the trailer to ensure it is secure before riding.


How to attach a bike trailer to a bicycle?

To attach a bike trailer to a bicycle, first, make sure the trailer is compatible with your bike. Then, attach the trailer's hitch to the rear axle of the bike. Secure the hitch tightly and make sure the trailer is level. Finally, connect any safety straps or additional securing mechanisms as needed.


How to attach a bike trailer to an e-bike?

To attach a bike trailer to an e-bike, first make sure the trailer is compatible with your e-bike. Then, attach the trailer hitch to the rear axle of the e-bike. Connect the trailer arm to the hitch, making sure it is secure. Finally, test the connection by gently pulling on the trailer to ensure it is properly attached before riding.


How is a trailer attached to a tractor?

Depends on what type of tractor and trailer you had in mind. For a farm tractor pulling a trailer, it's usually a pintle on the tractor which is run through a clevice on the trailer. For road going vehicles, the fifth wheel trailers are often used, where a trailer kingpin will be inserted and locked into a fifth wheel on the vehicle. In the case of an 18 wheeler, air lines will connect from the tractor to the trailer to operate the trailer's air brake system.


How do you test boat trailer turn signal lights?

Hitch the trailer. Connect the lights. Start your car or truck. Turn the turn signal on. Get out and go behind the trailer. See if they blink. Repeat for the other side.