0
What else can I help you with?
What is the application of bus topology?
ask OC transpo
Which network topology requires the use of terminators?
The bus topology requires the use of terminators. In this topology, all devices are connected to a single central cable, known as the bus. Terminators are placed at both ends of the bus to prevent signal reflection, which can cause data collisions and network interference. Without terminators, the signals can bounce back along the bus, disrupting communication between devices.
What is the common network of bus topology?
The common network of bus topology is a network where clients are connected through cables called a bus. You can learn more about this at the Wikipedia. Once on the website, type "Bus network" into the search field at the top of the page and press enter to bring up the information.
Which LAN topology involves the network cable forming a single bus to which every workstation is attached?
The LAN topology that involves the network cable forming a single bus to which every workstation is attached is called the bus topology. In this setup, all devices share a single communication line, and data travels in both directions along the bus. The main advantage of bus topology is its simplicity and ease of installation, but it can be prone to collisions and performance issues as more devices are added. Additionally, if the main cable fails, the entire network goes down.
What are advantages of a bus network topology?
Ease of operation Reliability Low Cost
Which topology works with a 10 base 2?
Linear bus topology
What is the simplest network topology?
Linear bus topology is the easiest; there is practically no configuration to worry about except the wiring.
What is linear bus?
A linear bus topology is a straight line (linear) topology which wires devices in a straight, sequential fashion (like daisy-chaining). It is characterized by a very simple and easy way to create a LAN but has problems with breaks in any of the cables in the topology. This linear bus topology does not require a central connectivity device such as a hub, switch, or router.
What are the types of bus topology?
There are two basic categories of network topologies Physical topologies Logical topologies The shape of the cabling layout used to link devices is called the physical topology of the network. Logical topology is the way the signals act in the network In BUS topology you have "THE LINEAR BUS" and "THE DISTRIBUTED BUS" IN the LINEAR bus all the nodes of the network are connected to a common transmission medium which has 2 end points where as in the DISTRIBUTED, all the nodes are connected to a common transmission medium which has more than 2 end points.
Bus topology is the most popular topology justify?
Bus topology is the most popular topology. Justify.
Is peer to peer networking can be use by straight row?
Yes, peer to peer can be implemented in linear bus topology.
What network topology connects to a trunk cable?
Bus Topology.
What is the fastest topology?
bus topology
How can bus topology extend?
Bus topology is extended via the use of repeaters.
What is the fastest Network Topology?
bus topology
Definition for bus topology what are the features of bus topology what are the advantages and disadvantages of bus topology.?
Four collision domains are present Two broadcast domains are present.
Where is Linear Bus topology used?
Linear bus topology is commonly used in small networks, such as in home or small office environments, due to its simplicity and ease of installation. It is suitable for networks that require minimal cabling and are not heavily loaded with data traffic. However, it is less reliable for larger networks, as a failure in the main cable can disrupt the entire network. This topology has largely been replaced by more robust designs, like star topology, in larger or more critical applications.
