In a bus topology, the purpose of a terminator is to absorb signals at both ends of the bus cable, preventing them from bouncing back and causing network interference. Without terminators, signals could reflect back along the bus, leading to data collisions and communication errors. By ensuring proper signal termination, terminators help maintain the integrity of data transmission across the network.
terminator
ask OC transpo
The common network of bus topology is a network where clients are connected through cables called a bus. You can learn more about this at the Wikipedia. Once on the website, type "Bus network" into the search field at the top of the page and press enter to bring up the information.
Ease of operation Reliability Low Cost
In a bus topology, data transmission typically uses protocols such as Ethernet, specifically the Carrier Sense Multiple Access with Collision Detection (CSMA/CD) protocol. This protocol allows devices to detect when the bus is free and transmit data while monitoring for collisions. If a collision occurs, devices stop transmitting and wait for a random time before attempting to resend. Other protocols, like Token Ring, can also be adapted for bus topologies, but CSMA/CD is the most common.
Bus
terminator humko malum nahi..
To prevent signals from being echoed back through the network
BNC connectors, Ts, barrel, 4ways, and the all important terminator.
BUS topology
Bus topology is the most popular topology. Justify.
bus topology
Bus Topology.
Bus topology is extended via the use of repeaters.
bus topology
Four collision domains are present Two broadcast domains are present.
bus topology, ring topology