There are really three basic types of Network topologies. They are Star, Bus, and Ring. Let me explain them to you.
Star - All computers and devices are connected to a centrally located hub or switch. The hub or switch collects and distributes the flow of data within the network. It's better to use a switch than a hub because a switch transmits the data to the intended recipient rather than to all hosts on a network.
Bus - All computers and devices are connected in series to a single linear cable called a trunk or sometimes called a backbone. Both ends of the trunk must be terminated to stop the signal from bouncing back up the cable. Because the bus topology does not have a central point it is difficult to troubleshoot problems. Also, a break at any point along the bus can cause the entire network to go down.
Ring - In this topology, all computers and devices are connected to cable that forms a closed loop. Each computer on this type of topology acts like a repeater and boosts the signal before sending it to the next computer. It transmits data by passing a "token" around the network. Hence this type of network is commonly called a token ring network. Similar to the Bus topology, if one computer fails, the entire network goes down.
For More information you can visit website:http://www.iyogibusiness.com
bus topology and man
Ring Topology, Mesh Topology, Bus Topology, Star Topology
Bus topology as many nodes are connected to single link
compare and contrast the three types of addresses used in a network
Topology refers to the physical wiring of a network. There are 4 basic types of topologies:busstarringmesh and/or hybrids
Bus star ring mesh hybrid
1.bus topology, 2.ring topology, 3.mesh topology, 4.star topology, 5.hybrid topology
a topology is a way to connect the network system. we can connect network with different types ring ,bus and mash is a topology or way to show connect network with different types in ring topology the systems which we want to connect in network in the form of ring
Network topology can be defined as the way in which different computers are interconnected with the help of some specific media.ORThe physical layout of the computer is known as network topology.there are four types of network topology.1. Star topology2. Bus topology3. Ring topology4. Mesh topology
Network Topology refers to the way that cables and other pieces of hardware connect to one another. There are four common "base" types of topologies: bus, ring, star, and mesh. There are other types as well, but these are referred to as "hybrid topologies." The most commonly used network topology is a hybrid topology called the Star Bus Topology.
Some common types of network topologies include bus, ring, star, mesh, and hybrid. Bus topology uses a single cable to connect all devices, ring connects each device to two others in a ring, star has all devices connected to a central hub, mesh connects each device to every other device, and hybrid combines two or more different types of topologies.
Network topology is the way a computer network is set up and arranged, Examples for possible topologies include ring, star, bus, and line. Each of these topologies have their advantages and disadvantages, with star being the most common in today's world.