0
What else can I help you with?
How much concrete would it take to fill a 16' x 16' x 6'?
27 cubic feet = 1 cubic yard 16' x 16' x 6' = 1,536 cubic feet = 568/9 cubic yards
How many ft is 27648 cubic inches?
One cubic foot is 1728 cubic inches, so 27648 cubic inches equals 16 cubic feet.
How much concrete does it take to fill a 2'x2'x4' square hole?
To fill a 2'x2'x4' square hole, you first calculate the volume in cubic feet. The volume is 2 ft x 2 ft x 4 ft = 16 cubic feet. Therefore, you would need 16 cubic feet of concrete to fill the hole. If you need to convert this to cubic yards, it would be approximately 0.59 cubic yards, since there are 27 cubic feet in a cubic yard.
How many 8-inch concrete block in a cube?
An 8-inch concrete block typically has dimensions of 8 inches by 8 inches by 16 inches. To find out how many of these blocks fit in a cubic yard, which is 27 cubic feet, you first convert the block dimensions to feet (0.67 ft by 0.67 ft by 1.33 ft), giving a volume of about 0.59 cubic feet per block. Dividing 27 cubic feet by 0.59 cubic feet per block results in approximately 45 blocks in a cubic yard.
How many yards of concrete are in a eight feet by sixteen feet by four inch deep pad?
4 inches = 1/3 foot 27 cubic feet = 1 cubic yard Volume = 8 x 16 x 1/3 = 128/3 cubic feet = 1.58 cubic yard (rounded)
How many square feet does 16 cubic feet cover?
None. A cubic yard is a measure of volume (in 3-d space). A square foot is a measure of area (in 2-d space). The two measure different things and there is no sense in trying to convert from one to the other.
How do you convert 16wx13hx32l into cubic feet?
If the length of a thing is multiplied by its width we get square feet (area). If that is then multiplied by the height of it we get cubic feet (volume). If something is 16 feet wide, 13 feet high and 32 feet long it's volume is 16 x 13 x 32 = 6,656 cubic feet
How many cubic inches in 16 cubic feet?
16 cubic feet = 27,648 cubic inches
How do you calculate the amount of sand needed to cover 100 square feet 2 inches deep?
Sand is usually sold by the ton so if you find the amount needed by 100 x 1/6 this will give you your cubic foot total. Then you will divide by 27 which is the number of cubic feet in a cubic yard. You should have 16 cubic feet at these measurements. 16 divided by 27 is .59 or a little over half a cubic yard. There are 22 cubic feet of sand per ton so 1 ton of sand should do it. So if the sand in your area is sold by the ton then get 1 ton. If it sold by the yard get 3/4 yard if you can. Hope this helps.
How do you convert 13 inches x 12 inches x 16 inches into cubic feet?
The formula for Cubic feet is:length × width × height131216___2496"http://wiki.answers.com/Q/How_do_you_convert_13_inches_x_12_inches_x_16_inches_into_cubic_feet"
How do you convert 4000 square foot to cubic foot?
To convert square feet you multiply by the height. Example 1 - if you are trying to find the cubic feet in a home that has 8 foot tall rooms it would be 4,000 square feet X 8 feet = 32,000 cubic feet Example 2 - if you are trying to find the cubic feet in a flower bed 6 inches deep it would be 4,000 square feet X 0.5 feet = 2,000 cubic feet
How many pounds are there in 16 cubic feet?
None. A pound is a measure of mass while a cubic foot is a measure of volume. The two measure different things and it makes no sense at all to try to convert from one to the other. You could easily lift 16 cubic feet of air using 1 hand but 16 cubic feet of lead is quite another matter!
