20,000,000
Multiply mmcfd by 1,000
To convert from thousand cubic feet (mcf) to million cubic feet (mmcf), divide the number of mcf by 1,000. For example, if you have 5,000 mcf, you would calculate it as 5,000 mcf ÷ 1,000 = 5 mmcf. Thus, 1 mcf is equal to 0.001 mmcf.
Write mcf out in full.
To convert Therms to McF (thousand cubic feet), you can use the conversion factor that 1 Therm is approximately equal to 0.01 McF. Therefore, to convert Therms to McF, you multiply the number of Therms by 0.01. For example, if you have 100 Therms, you would calculate 100 × 0.01 = 1 McF.
509
To convert thousand cubic feet (MCF) to barrels per day (BPD), you can use the conversion factor that 1 barrel of oil is approximately equal to 5.8 MCF of natural gas. Therefore, you would divide the MCF value by 5.8 to obtain the equivalent in barrels. For example, if you have 100 MCF, you would calculate 100 MCF ÷ 5.8 ≈ 17.24 BPD.
To convert 647.5 million cubic feet (mcf) of natural gas to dekatherms (dth), you can use the conversion factor where 1 mcf is approximately equal to 1.037 dth. Therefore, 647.5 mcf is about 672.1 dth (calculated as 647.5 mcf × 1.037 dth/mcf).
To convert megawatt-hours (MWh) to thousand cubic feet (MCF) of natural gas, you need to know the energy content of the gas. One MCF of natural gas typically contains about 1,000,000 British Thermal Units (BTUs). Since 1 MWh is equal to approximately 3,412,000 BTUs, you can use the formula: MCF = (MWh × 3,412,000 BTUs) / 1,000,000 BTUs/MCF. Thus, the conversion factor is roughly 3.412 MCF per MWh.
(mcf/day*1000)/24=scf/hr (scf/hr)/24=scf/min
To convert thousand cubic feet (mcf) to million British thermal units (mmBtu), you need to know the specific heat content of the gas being measured. The conversion factor can vary depending on the type of gas. As an approximate conversion, for natural gas, 1 mcf is roughly equivalent to 1 MMBtu.
One thousand cubic feet of gas (Mcf) -> 1.027 million BTU = 1.083 billion J = 301 kWh by Lyon
Oh, dude, it's like this - to convert MMBtu to MCF, you need to know the heat content of the gas in Btu per cubic foot. Then you just divide the number of MMBtu by the heat content to get the equivalent in MCF. It's like converting apples to oranges, but with gas. Easy peasy, right?