To feed paper in the Sharp Calculator EL-2192, first ensure the calculator is powered off. Open the paper compartment by sliding the cover, then insert the paper roll with the printed side facing up and the end of the paper positioned under the printer mechanism. Once the paper is in place, close the cover and power on the calculator. Press the "Feed" button to advance the paper if necessary.
Just jam the paper in there holding the feed button until it starts feeding through!
I can't post photos here but I can tell you it's easy. Use roll of adding machine paper so loose end starts at back of roll. Feed it into the slot on the back of the Casio. Then turn on calculator to print and push the first button on the left that looks like an up arrow. That will feed the paper into the calculator. When it shows up through the paper feed, put the roll on the paper arm and you're done. Some people say you should cut the paper at an angle if you have any problems getting it to feed. I've never had a problem. This is the easiest and quickest paper loading calculator I've ever used.
It goes throw a slot in the back of the machine. Cut the paper straight, insert in slot and keep pressing the advance feed button until it feeds through. You can find the manual at :http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000003765.pdf
paper?
Okay so you have to feed the paper through the slit in the back and put it through between the black and silver part but it takes forever! so what i did was folded a post-it note in half and then evenly taped it to the top of the roll that you use to feed into the calculator. Feed it through and hold down the feed button while pushing the paper/post it through. the post-it makes the paper less flimsy so you can push it through without the paper bending. i know it's pretty ridiculous but it works and saves a lot of time!
feed paper to normal butterfly
feed paper to normal butterfly
Push paper feed.
To load paper in a Casio HR-100TM calculator, first, lift the paper cover located at the back of the unit. Insert the roll of paper into the compartment, ensuring the paper feeds from the bottom of the roll and over the top. Pull a few inches of paper through the front and close the cover, making sure the paper is aligned properly with the print mechanism. Finally, press the "Feed" button to advance the paper and ensure it is correctly loaded.
well yes more than likey.... only if you feed it TOO MUCH! but why would you feed a calf paper??;)!!
A home loan calculator helps in finding out the loan amount that you can receive. You need to feed in the finance amount and tenor and the profit rate percentage.
The word paperport is not in the dictionary. Although, a paper port is an opening in a copier where you feed paper into it.