0
== == You need a 240 volt specific outlet and to run new cable to a new wall box fitted in the required position, etc. If it is a new circuit, the breaker box will require a new two pole breaker. But doing this is very, very dangerous. Done improperly, you could die, cause a house fire, or both. == == <><><> You will need to have room in your breaker box for a two pole breaker (i.e. a 20 amp type that spans both legs in your panel). You would then run 10 or 12 gauge cable from the box to the socket making sure to attach the cable according to the building standards in your area. If any of this sounds the least bit unfamiliar to you I would strongly recommend that you hire a professional to do this for you. Incorrectly wired circuits can cause serious injury and death as well as loss of property.
For your safety and that of anyone else who may to use the appliance, ask a professional licensed electrician to advise you or to do the work for you. If you do this work yourself, always turn off the power
at the breaker box/fuse panel BEFORE you attempt to do any work AND
always use an electrician's test meter having metal-tipped probes
(not a simple proximity voltage indicator)
to insure the circuit is, in fact, de-energized. : IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOB
SAFELY AND COMPETENTLY
REFER THIS WORK TO QUALIFIED PROFESSIONALS.
Add your answer:
Earn +20 pts
Which part of a curcuit provides electrical energy?
The power source, such as a battery or a generator, provides electrical energy to a circuit.
Replacing 240v light socket what color is negative wire?
In a 240V light socket, the negative wire is typically colored black, blue, or brown, depending on the wiring system used in your country. Always make sure to double-check with a voltage tester before working on any electrical project to ensure your safety.
The electrical resistance of a 100w 240v bulb will be?
42 ohm
What type of socket is used to install memory?
What type of socket is used to install system memory
What type of socket used to install system memory?
What type of socket is used to install system memory
What type of energy is a wall socket?
Electrical energy comes out of a wall socket.
What current will a 100w electric fan motor draw when you plug it into a 240v wall socket?
To calculate the current drawn by the 100W electric fan motor when plugged into a 240V socket, you can use the formula: Current (A) = Power (W) / Voltage (V). Therefore, Current = 100W / 240V = 0.42 Amperes. So, the motor will draw approximately 0.42A of current.
What does 240 mean?
240 refers to the voltage used in an electrical system. The US uses 120V/240V, while the UK uses just 240V.
Can you plug in a 240v-50Hz 2.8kW oven into the mains socket or does it have to be hardwired into a spur?
Yes it can be plugged in with a 13A plug.
What type of energy is wall socket?
Electrical energy comes out of a wall socket.
How do you replace an oxygen sensor in a 1998 Dodge pickup?
You start by unplugging the electrical connector. You then use a 7/8 inch wrench or oxygen sensor socket to turn counter clockwise until removed. Reverse steps to install.You start by unplugging the electrical connector. You then use a 7/8 inch wrench or oxygen sensor socket to turn counter clockwise until removed. Reverse steps to install.
What is Voltage in Australia?
The standard household electrical supply is 240 Volts AC at 50 Hertz nationally. Note that Australia's used the "I" plug (socket), so if you're coming from almost anywhere else (except for a few countries, including parts of China), then socket compatibility is an issue. The best thing to do is to buy a universal plug adapter.
