1 gallon = 231 cubic inches
1 cubic foot = 1,728 cubic inches
20 gallons = 4,620 cubic inches = 2.674 cubic feet (rounded) ===> slightly more than 1/2 bag.
Forty five 80 pound bags of cement are needed to make one cubic yard of concrete.
The number of bags in a cubic yard depends on the size of the bags being used. Typically, a cubic yard can fit around 13.5 regular-sized garbage bags with a capacity of 33-35 gallons. However, this may vary with larger or smaller bags.
To fill a 30-gallon drum with concrete, you would need approximately 12 bags of 80-pound concrete. This is based on the fact that one 80-pound bag of concrete yields about 0.6 cubic feet, and a 30-gallon drum holds about 4 cubic feet. Therefore, dividing 4 cubic feet by 0.6 cubic feet per bag gives you roughly 6.67 bags, but accounting for the weight and settling, it's safer to estimate around 12 bags.
Depends what is in the bags..... Also cubic meter, yard, inch, etc.
That would depend on the density of the bags of topsoil.
To calculate the volume of concrete needed to fill a 55-gallon drum, you first need to know the dimensions of the drum. Once you have the dimensions, you can use the formula for the volume of a cylinder (V = πr^2h) to calculate the volume of concrete required. Remember to convert the volume from gallons to cubic inches or feet for accurate results.
typically one pallet, i believe theres 42 80lb bags on a pallet.
One gallon is about 128 ounces, so if one tea bag is good for 10 oz of water, then about 10 teabags is good for a gallon. Start with 10 and adjust accordingly with water.
To determine how many 40 lb bags of topsoil are needed to cover 12 cubic yards, first convert cubic yards to cubic feet. There are 27 cubic feet in a cubic yard, so 12 cubic yards equals 324 cubic feet. Assuming a 40 lb bag covers about 1.5 cubic feet, you would need approximately 216 bags (324 cubic feet ÷ 1.5 cubic feet per bag = 216).
To determine how many bags of concrete you need to fill a five-gallon bucket, first calculate the volume of the bucket. A five-gallon bucket holds about 0.67 cubic feet. If you're using a standard 60-pound bag of concrete, which typically yields about 0.45 cubic feet, you would need approximately 1.5 bags to fill the bucket. Always check the specific yield of the concrete mix you are using for the most accurate calculation.
To determine how many bags of sand are needed to make 1 cubic yard, you first need to know the size of the sand bag. A standard bag of sand typically contains 0.5 cubic feet. Since there are 27 cubic feet in a cubic yard, you would need 54 bags of sand (27 cubic feet divided by 0.5 cubic feet per bag) to make 1 cubic yard.
You would need 31, 80 pound bags to cover 1 cubic yard at 4 inches deep. If you would like the depth to be 6 inches, 45 bags would be needed.