How many cubic yards are in an acre?

Answer 1

Acres is a unit of area, and cubic yards is a unit of volume, so there is no direct conversion between them, it just depends on what you are trying to do.

If you can provide additional information on exactly what you are trying to do, I may be of more help.

Answer 2

1 acre = 43560 square feet Now, square feet are a unit of Area L x W Cubic feet are a unit of Volume L x W x H (height) Since an acre of land is just on the X Y axis/plane then it is simply 43,560 square feet. In order to get cubic feet, you'd have to have an H (height) or thickness of land/area. This is not possible on an X Y axis, but would be on a 3 dimensional plane consisting of X Y and Z axis. For example: X=5, Y=6 and Z=7 therefore the cubic feet would be 210. ( this does not account for conversion factors such as changing the X and Y and Z, if they were in meters, to feet). That would need to be done first. So, in conclusion, I would think you can determine square feet, but not cubic feet unless given a particular depth or H (height).

Answer 3

One is a volume the other an area, so there is no answer

However...

***Except for the answer, the below was copied and pasted.***

To answer conversion questions like this go to Google.com and in the search window, type in your question like this..

24 cups in gallons

or this

4000 square feet in acres

or this

45 inches^3 in liters

and it will give you a direct answer.

It is great for this.

In your case type in

??????????????

Note, you can also use the Google search window as a calculator. You might type in

23.5 x 54^2 x sqrt 5 =

If this is a homework question, the below is a very powerful and easy method to convert numbers from one unit to another.

Let us take an easy example.

Say you have 2.7 meters and you want to convert it to centimeters.

You know that 1m = 100 cm

Think about how we can take the equation 1m = 100 cm and divide both side by "1m" and get 1= 100 cm/m. (We have "re-arranged" the equation.)

Now think about how it is that if you multiply 2.7m by the number 1 you simply get 2.7m again.

Now think about how since "100 cm/m" equals 1 because 1= 100 cm/m you can multiply 2.7 m by "100 cm/m" and you will have the same distance. The only difference is that after you cancel out the meters the distance will be expressed in different units.

Here it is expresses mathematically...

2.7m = 2.7m X 1 = 2.7m X 100 cm/m = 270 cm. Notice how the meters cancel each other out and you are left with centimeters.

This always works

Here is a harder example.

Convert the speed 8,100 m/s to the units of km/hr

As discussed above since 1000m = 1 km, we will in this case divide both sides of the equation by "1000m" and get 1=(1/1000)km/m.

when we multiply by that and cancel out the meters, we get 8,100 m/s = 8.1 km/s.

(Note that we could have taken the equation 1000m = 1 km and divided both sides by "1km" to get 1 =1000m/km and then DIVIDED by 1000km/m and the meters would have still canceled out. Here is the math 8,100m/s = 8,100m/s / 1 = 8,100m/s / 1000m/km = 8.1 km/s )

Now to convert the seconds to hours we first convert the seconds to minutes by taking the equation 1min = 60s and dividing both sides by "1min" to get the equation 1 = 60s/min

When we multiply 8.1 km/s by the above we get 480 km/min

We do the same thing with the equation 1hr = 60 min to get 1 = 60 min/hr and when we multiply, we get 28,800 km/hr which is in the correct units.

For some reason it is not the law for physic teachers to tell their students about this method.

Here is website that goes into it in more detail.

http://oakroadsystems.com/math/convert.htm#Intro

Answer 4

None, since there can be no conversion. An acre is a measure of area in 2-dimensional space while a cubic foot is a measure of volume in 3-dimensional space. The two measure different characteristics and, according to the most basic principles of dimensional analysis, any attempt at comparisons or conversions between the two are fundamentally flawed.

Answer 5

An acre is an area, a cubic yard is a volume, the question has no meaning

Answer 6

2.9592803 × 10-7 cubic mile

== You can find out more on google by just search

"? acrefeet in cubic mile"

Answer 7

Cubic feet and acres have no commonality whatever - you cannot compare them in any way.