400.
None. It's a hole. 162 cubic feet of air. There is no dirt in a hole.
The volume of the hole is 2 yards * 3 yards * 1 yard = 6 cubic yards. To convert this to cubic feet, we multiply by 27 (since 1 cubic yard = 27 cubic feet). Therefore, the volume of the hole in cubic feet is 6 cubic yards * 27 cubic feet = 162 cubic feet of dirt.
None because it's a hole but 6 cubic yards of dirt will fill it up.
If the hole is 4 foot square 4' wide by 4' long by 20' deep, then I assume that you are after cubic yards. Multiply the width by the length by the depth and then divide by 27. This would give you the answer in cubic yards. 11.85 cubic yards.If the hole is round:Volume of a cylinder is Pi *R2 * H In this case: 3.14 X 22 X 20 = 251.2 cubic feet there are 27 cubic feet in a cubic yard (3x3X3=27) 251.2 cubic feet / 27 cubic feet per cubic yard = 9.3 cubic yards
218.75 cubic feet or 8.1 cubic yards
If you were looking for the dimensions of the hole as of a rectangular prism, it would be 3 * 2 * 2 = 12 yards cubed (324 ft cubed).But, there is no dirt in the hole, just the 12 yards cubed that came out of it.
I don't know, but I can tell you there's no earth at all in a HOLE 2 yards long and 4 yards deep.
1 cubic yard = 27 cubic feet12 x 12 x 2 = 288 cubic feet = 102/3 cubic yards
39,600 cubic feet. 1,466 cubic yards or about 122 truckloads if it were non-compacted fill.
It doesn't hold any dirt. It's a hole.
There are 27 cubic feet in a cubic yard. 3 inches = 0.25 feet 4.25 x 4.25 x 7 = 126.4375 cubic feet. 126.4375 / 27 = 4.68287037037037 cubic yards, rounded to one decimal place, 4.7 -- edit-- Assuming that you want to fill the hole with tightly packed sand, and that the sand is bought loosely packed, you'll need to over-estimate the amount, depending on the differences involved.
1 "yard" of concrete is really 1 "cubic yard" = 27 cubic feet8 x 8 x 4 = 256 cubic feet = (256/27) = 9.48 cubic yards