Decide whether you want the hole to have a square or cylindrical profile.
Use the corresponding formula to calculate the volume, which will be in
cubic feet. Then convert from cubic feet to gallons.
This process gives you the volume of the hole. It may or may not have
any water in it. It may even be empty, or full of dry leaves, etc.
The volume of the hole is 8.82 cubic feet OR 66 US gallons of liquid.
that is about 105 cubic feet, and if you fill with water,which has 7.48 gallons per cu ft, that is 7.48 x 105 = 782 gallons
To calculate the volume of a hole that is 6 feet wide and 6 feet deep, you would use the formula for the volume of a cylinder: Volume = π × radius² × height. The radius is half the width, so it would be 3 feet. Thus, the volume of the hole is approximately 3.14 × (3)² × 6, which equals about 169.56 cubic feet. Since there are 7.48 gallons in a cubic foot, the hole can hold approximately 1,267 gallons of water.
Approx 642665 US gallons.
16,696.51 gallons. Multiply width times length times depth- that gives the number of cubic feet of volume (2,232 cubic feet) Multiply THAT by the number of gallons in one cubic foot (7.48 gallons)
None if it's a hole, 1570.8 if it's full of water.
94
That hole is 6 feet deep or 72 inches deep.
22.5 cubic feet = 168.3 gallons US (rounded) 140.15 Imperial gallons
12*40 cubic feet converted to gallons is 3591 gallons.
Depends how deep it is, volume requires 3 dimensions.
There is no dirt. It's a hole.