question is meaningless. gallon is a unit of volume, sq ft is a unit of area. the above is a horrible answer. simply put your question was miss worded. i believe you meant cubic foot (not square foot). the answer is 7.481 gallons in a cubic foot
1 gallon. Sugar is soluble in water and should not significantly change the volume
no .. 1 sq meter is equal to 1000 litres of water if that helps
Inches are a measure of length, and gallons is a measure of volume. However, volume can be measured in units of length cubed (because, for instance, the volume of a cube is the length of each side cubed).The are 231 cubic inches (or in3) per gallon.
A square meter of water would not be measured in gallons, as gallons are a measure of volume, while square meters are a measure of area. It would depend on the depth of the water in the square meter area to calculate the volume in gallons.
1 US gallon of water equates to 0.133681 cubic feet.
1 gallon
There are no gallons of water in a square foot. Gallons is a unit of volume, and square feet is a unit of area, not volume. If you are asking about cubic feet, however, the answer is there are about 7.5 gallons in a cubic foot.
A gallon is a unit of volume, an acre is a unit of area, so you can't really convert that. If you know that the acre is covered with water to a certain depth - say, half an inch - then you would have a volume.
One imperial gallon of water is approximately 4.546 liters in volume.
The water displaced by the body is equal to its volume.
"Bottled waters" is not a volume measurement. A gallon is a volume measurement. There are bottles that hold one gallon, in this case the answer is one. There are bottles that hold a half gallon, in this case the answer is two. There are bottles that hold a pint, in this case the answer is eight. There are bottles that hold 12 oz, in this case the answer is five and a third. There are bottles that hold a 8 oz, in this case the answer is eight.
For General.A (gallon) is a fluid measurement, and a (cubic foot) is a volume measurement. So to measure a gallon, you need to measure the square in. of container (use container that measures the same square in. from bottom to top), then pore in one gallon of any liquid and measure the hight it comes; multiply this by square in. of container and you have your cubic inches in that gallon. For Water.One gallon equals 0.134 cubic feet. This is granted that the water remain at constant temp., and at a point to have the stated volume.