One cubic meter of 20mm to dust aggregate typically weighs between 1,500 to 1,800 kilograms, depending on the specific type of aggregate and its moisture content. This weight can vary slightly based on factors such as the density of the material and any included voids. For practical purposes, an average weight of around 1,600 kg per cubic meter is often used in construction.
1.5 tonnes per Cubic metre.
The weight of stone aggregate varies based on its density, but a general estimate is that a cubic meter of 20mm, 40mm, and 10mm stone aggregate typically weighs around 1.5 to 1.7 tons. For example, 10mm aggregates are closer to 1.5 tons per cubic meter, while 20mm and 40mm aggregates can weigh slightly more, up to 1.7 tons. The specific weight can vary based on the type of stone and moisture content.
The weight of 20 mm aggregate can vary depending on its specific density, but a common estimate is around 1,600 to 1,800 kilograms per cubic meter. To convert this to kilograms for a specific volume, you would need to know the volume you are considering. For example, if you have one cubic meter of 20 mm aggregate, it would weigh approximately 1,600 to 1,800 kilograms.
unit wight of 20mm aggregate
1 cubic meter of grave contains 50 square meters at 20mm depth (1000mm / 20mm = 50). 2860 / 50 = 57.2 So you need 57.2 cubic meters of gravel.
The weight of 20mm metal for one cubic feet can vary depending on the specific type of metal being used. However, on average, the weight of 20mm metal is typically around 49.98 pounds per cubic feet.
Approximately 5bags of cement are in 1 cu.m concrete ratio 1:3:6 with 20mm aggregate, water-cement ratio 0.5.
The weight of a 20mm marble slab depends on its dimensions and the density of the marble. On average, marble has a density of about 2.7 grams per cubic centimeter. To find the weight, you would calculate the volume of the slab (length x width x thickness) in cubic centimeters and then multiply by the marble's density. For example, a 1m x 1m slab would weigh approximately 54 kg.
(3.25 (sq m)) * 20 mm = 0.065 cubic meters
To make 1 cubic meter of concrete, you typically need about 1.5 cubic meters of sand and gravel combined. The general ratio for mixing concrete is 1 part cement, 2 parts sand, and 3 parts gravel. Therefore, for 1 cubic meter of concrete, you would need 0.5 cubic meters of cement, 0.75 cubic meters of sand, and 0.75 cubic meters of gravel.
20 mm = 0.020 meters 18 square meters * 0.020 meters = 0.36 cubic meters
mark a pt 20mm above xy planemark 20mm below