Yes mesh is the most expensive because in a mesh environment, a cable runs from every computer to every other computer. If you have four computers , you must have six cables three coming from each computer to the other computers.
Mesh topology is the most secure topology bcoz in mesh topology each device has a dedicated link to others .
Mesh type of topology is the most reliable.
yes, network topology does matter to design a network. as we know that topology is a structure of network. without a topology network cannot be designed. we have to consider which topology to use and what does each topology does. different topology have its different features. if you want most secure connection use full mesh topology
mesh topology
The best topology is ring topology. Star is the next best after ringr, and then bus, which is pretty old, but not too expensive. Full mesh topology is theoretically the best since every device is connected to every other device, thus maximizing speed and security. These, however, are quite expensive to install. The next best would be tree topology, which is basically a connection of stars.
The most reliable network topology is often considered to be the mesh topology. In a mesh network, each device is connected to multiple other devices, providing multiple pathways for data to travel. This redundancy ensures that if one connection fails, data can still be routed through alternate paths, minimizing downtime and enhancing reliability. However, mesh networks can be more complex and costly to implement compared to simpler topologies.
The most common LAN topology is that of a "star." In a star topology, each computer, or "node", is connected to a central hub. This is more reliable than a more classical "ring" topology, because a node failing will not bring down the entire network. A bus topology is arguably more reliable, but has poorer performance.
There are several advantages to a mesh network topology. First, it is fault tolerant; since there is no gateway, nodes can connect to each other with no regard to the state of the rest of the network. In addition, nodes can create their own paths through the network because there is no gateway computer. One disadvantage to a mesh topology is that setup time can be quite time consuming.
1.The star topology use a hub in the center, only one hub. So all data exchange will go throught that one hub/router to reach another computer .If the hub is down, all the network is down too. In a mesh topology, each computer in the network has its own hub/or itself, so data exchange is done directly from one computer/or its hub, to another computer/or its hub, this is more secure since only one computer will be down in a case of problem with the interface(hub/itself[network card]) 2. Star topology has minimal line cost because only n-1 lines are required for connecting n nodes while mesh topology is the most expensive network from the point of view of link cost.If there are n nodes in a network. n(n-1)/2 links are required. Hence, cost of linking the system grows with square of the number of nodes. 3.In star topology communication is not very fast between any two nodes while in mesh topology communication is very fast between any two nodes.
star topology. Because they include a centralized connection point; can easily be moved, isolated, or interconnected with other networks; they are, therefore, scalable. For this reason, and because of their fault tolerance, the star topology has become the most popular layout used in contemporary LANs.
For a topology, the most common is a star topology.
The network topology that allows messages to take any possible shortest and easiest route to their destination is known as a mesh topology. In a mesh topology, each node is interconnected with multiple other nodes, enabling multiple pathways for data transmission. This redundancy enhances reliability and optimizes routing, as data packets can navigate through various paths to find the most efficient route to their destination.