0
A volume of 700 cubic feet would be equivalent to a cube-shaped space with each side measuring approximately 8.5 feet in length. To visualize this, imagine a room where the ceiling is 8.5 feet high, and the length and width of the room are also 8.5 feet. This would give you a total volume of 700 cubic feet.
Add your answer:
Earn +20 pts
How many cubic feet is 700 feet by 200 feet by a depth of 85 feet?
This is a volume of 11.9 million (11,900,000) cubic feet.
How many cubic feet per minute is 700 liters per minute?
24.72 cubic feet per minute at 700 liters per minute.
How much cement is need to cover 700 square feet 1 inch deep in kilos?
700 sq ft * 1/12 ft = 700/12 cubic feet = 58.33... cubic ft or 2.16 cu yards.
How many yards of concrete will cover 700 square feet at 6 inches thick?
1 cubic yard = 27 cubic feet700 square feet x 1/2 foot = 350 cubic feet = 1226/27 cubic yards(12.963 cubic yards, rounded)
How many yards to fill a 700 feet x 12 feet x 12 inches deep?
12 inches = (exactly) 1 foot. Therefore, the volume in cubic feet is 700 X 12 = 8,400. There are (exactly) 27 cubic feet per cubic yard, so that the volume in cubic yards = 8,400/27 = 3.1 X 102, to the justified number of significant digits (limited by 12).
How much air would a 700 cfM fan pull out of a 8000 sq ft building?
700 cubic feet for every minute it runs.
How much does 700 litres of water weigh?
700 liters of water weighs approximately 700 kilograms, as the density of water is about 1 kg/liter.
How many square feet will 100 cubic yards of top soil cover at 2 inches thick?
1 yard = 3 feet 1 cubic yard = 27 cubic feet 1 inch = 1/12 feet Then: Square feet = (100 x 27)/ ( 2 x 1/12) = 2700 x 6 =16200 sq feet
How many square feet in 10x10x7?
you've given volume dimensions for a rectangular prism of 700 cubic feet. It's surface area would be 480 square feet.
How many hours would it take to fill a rectangular sedimentation basin that is 20 feet wide 60 feet long and 8 feet deep when the flow is 700 gallons per minute?
one cubic foot is 6.229 Imperial gallons or 7.481 US gallons 700/6.229 = 112.377589 cubic feet per minute for Imperial 700/7.481 = 93.570378 cubic feet per minute for US total cubic feet of sediment basin = 20*60*8 = 9600 so 9600/112.377589 = 85.426285 minutes for the Imperial gallon or 1 hour and 25.426 minutes and 9600/93.570378 = 102.596572 minutes for the US gallon or 1 hour and 42.597 minutes
How much sand use in 100 cft brick masonry?
About 6-7 cubic feet of sand is typically required for every 1 cubic foot of brick masonry. Therefore, for 100 cubic feet of brick masonry, you would need approximately 600-700 cubic feet of sand.
700 cft means how many kilogram?
700 cft (a terrible way to write cubic feet, or ft^3) is a volume...and amount of space that something takes up. It's not a weight.
