0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Why does your protective device keep tripping out?
Because something is wrong. Check for shorts and, if it is a GFCI, also check for ground faults and leakages. It is also possible, in the case of a GFCI, that an inappropriate load, such as a computer monitor or UPS, is connected. These devices pull transient power to ground and will trip a GFCI. Do not ignore the situation. The protective device is tripping for a reason.
Do you need a gfci outlet if you have a gfci breaker?
Not if the GFCI breaker is supplying the circuit you are wanting to put the GFCI receptacle into.
Can you use a GFCI plug into a GFCI outlet?
Yes you can. Lots of blow dryers have GFCI protection built in.
When there is a lot of rain the outside GFCI trips even though it is covered?
my gfci trips when my christmas lights r on and it rains is the gfci bad or is this normal of a perfectly working gfci
When would it be a better idea in a residence to install a GFCI breaker instead of an GFCI outlet?
GFCI Breakers are quite a bit more expensive than a GFCI outlet. More often than not a typical residence will need only a handful of GFCI outlets that combined together will be cheaper than a GFCI breaker. If you need to protect a series of outlets with GFCI protection you can simply connect the rest of the outlets on that same circuit downstream from the first outlet on the line and make that the GFCI. All you have to do is connect all the other outlets to the LOAD side of the GFCI outlet. If a GFCI fault occurs in any of the outlets down stream they will trip that very first GFCI plug you placed and keep you safe.
Can a circuit with a GFCI be shared at the box?
Your question is a bit vague, but let's try a two part answer. If you have a GFCI breaker in an electric panel you should only have one connection at the breaker, but the breaker will protect all devices on the circuit. If you are talking about a GFCI outlet, they are equipped to extend the GFCI protection to other non-GFCI outlets by using the proper "output" connection on the GFCI.
How many elec outlets can a GFCI detect?
A GFCI can detect ground faults on the specific circuit it is connected to. If multiple outlets are on the same circuit protected by a single GFCI outlet, the GFCI can protect all of them. However, if the outlets are on different circuits or not downstream from the GFCI, they would need their own GFCI protection.
What might happen if the line and load connetions of a feedthrough gfci receptacle were reversed?
Most probably the receptacles downstream from the GFCI would not be protected by the GFCI receptacle.
Are gfci plugs required in a bathroom?
Deoends on code you are governed by. In USA, a GFCI outlet or a circuit controlled by a GFCI circuit breaker would be required.
Are gfci receptacles required in kitchens?
No, you could use a GFCI circuit breaker instead.
How far do you put a GFCI from water?
How far do u put a GFCI receptacle from water
Can you install a GFCI on a 2 wire circuit?
Yes, you install a GFCI on a 2 wire circuit.
