m3 and cfm are units of different things and thus not convertable. A m3 is a unit of volume; 1 m3 is the volume that would be defined by a cube 1 meter on each side. Cfm means "cubic feet per minute," which is a rate of flow. 1 cfm is the rate of flow when 1 m3 (one cubic meter) of a substance passes a point in one minute.
1000
have a AC unit that is rated 5,200 CFM's. What is the conversion to BTU's
BTU is a measure of energy, while CFM (cubic feet per minute) is a measure of airflow. There is no direct conversion between the two because they measure different things. BTU is used to quantify heat energy, while CFM measures the volume of air flow.
To convert cubic meters (m^3) to kilograms (kg), you need to know the density of the substance in question. The formula for this conversion is: mass (kg) = volume (m^3) x density (kg/m^3). So, if you have the density of the substance, you can multiply the volume in cubic meters by the density to get the mass in kilograms.
CFM is a Volumetric Flow Rate while m/s is a velocity, you need the additional measurement of the Cross Sectional Area of the flow to fully work it out.Since there are 2118.88 CFM : 1 m3/s41.3 CFM divided by 2118.88 = 0.01949 m3/sDivide this by the area in m2 & you will get m/s.
To convert kilopascals (kPa) to cubic feet per minute (CFM), you need to know the flow rate of the gas or air in question and the pressure in kPa. The specific conversion factor will depend on the specific gas being used, its temperature, and other factors. You may need to consult engineering tables or use online conversion tools to perform an accurate conversion.
1m3 of steel is the same as the first answer 7840Kg.
1m3=35.5 ft3 1m3=0.0355 mscf
864 cfm (cubic feet per minute) represents air flow in terms of volume of air measured in cubic feet, whereas 864 cmh (cubic meters per hour) is air flow measured in cubic meters over an hour. The conversion factor from cfm to cmh is approximately 1 cfm = 1.7 cmh, so 864 cfm would have more air flow than 864 cmh due to the difference in volume units.
1x1x1= 1m3. 1m3 = 1000 litres
1m3 is equivalent to 1000 liters of water.
To convert cmh to cfm ..... divide cmh by 1.7 to convert into cfm....