Yes.
hub is the device that is used to extend the lan segment and used at layer1 that is physical layer.
Extender is used to extend the coverage area of your WiFi network. It works by receiving your existing WiFi signal, amplifying it and then transmitting the boosted signal.
hub is the device that is used to extend the lan segment and used at layer1 that is physical layer.
It's wireless network booster or extender. It costs almost as much as a wireless router.
Repeaters are usually used in coaxial based ethernet networks. For this purpose they are used to extend the length of a network segment. For example, in a 10base2 ethernet network the maximum length of a segment is 180 meters. A repeater could join two segments together to increase the length of the network and the number of clients in the network. In today's modern networks you will see neither coaxial networks nor repeaters in a LAN. Repeaters are used for DSL transmissions, but not for LANS.
A standard wireless router can only physically connect to four Ethernet enabled devices through the Ethernet ports. To extend a wireless home network, a bridge is needed. A bridge is a device that will connect devices such as gaming consoles and TVs to the existing wireless internet network that is enabled by a router. Additionally, a bridge will also extend the range of a home network, allowing for better reception to other computers and devices that are already connected to the network through wireless adapters.
a line extends to infinity. a segment doesnt not though.
a repeater
Take a compass, extend it about 3/4 of the length of the segment. Then from one end of the segment, draw a 180 degree arc. From the other end draw another arc. Connect the points where the arcs intersect. Where the line intersects with the segment is the midpoint of the segment. That is how you bisect a segment to find the midpoint - geometrically.
8.5 + 1.5=10 so 1.5
If you mean a straight line that does not extend BEYOND it's two end points, then that would be a 'line segment.'